Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Sushi Roller Intake Wheels - 1/2 in. Hex, 40a (Orange)

    The Sushi Roller Intake Wheels are an excellent choice for robot intakes, internal conveyors, feeder mechanisms, or anywhere you need a durable, compact and grippy roller. These rollers are made with a robust polycarbonate hex bore hub, so no external hub is necessary - just slide them onto a hex shaft, constrain them axially and you are good to go. Available in a range of durometers for a wide variety of applications, these cute little rollers are great for getting a grip on things!

     

    Specifications

    • Bore: 0.5 in. Hex, 5 mm Hex, 0.375 in. Hex
    • Core Material: Polycarbonate
    • Diameter: 1 in.
    • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
    • Tread Material: TPU
    • Weight: 0.022 lbs
    • Width: 1 in.
    # Pièce: am-4541_orange
    $6.00
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    Retainer Clip, 8mm id

    #am-0033
    $0.38
    (En stock)

    This retainer clip is used to hold objects (such as gears) in place on shafts. 

    Example: This product can be used to hold a gear onto a CIM motor shaft. 

    Specification: 

    • Material: Steel
    • Inner Diameter: 8mm
    • Outer Diameter: 15mm
    • Weight: Less than 0.001 lbs

    2.25 inch Compliant Wheel, 1/2 inch Hex, 35A Durometer, Green

    #am-3949_green
    $9.00
    (En stock)

    These 2.25" diameter HD (heavy-duty) solid-core Compliant Wheels are intended for manipulating objects where you need a little 'give' in your intake system. These wheels deform out of the way to allow rigid objects to be manipulated easily. This makes for high-performance intakes and internal conveyors. These wheels do not require the use of expensive hubs to be driven, thanks to their integrated high strength polycarbonate hubs - which are made from the same mold that creates our Hex Molded Spacers.

    4" Compliant Wheel, 1/2" Hex Bore, 35A Durometer, Green

    #am-3480_green
    $12.75
    (En stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    Hex Molded Spacers, 1/2 Hex Bore, 1 inch length

    #am-3948-1000
    $1.25

    Whether you are building an elite custom drivetrain or a championship manipulator, you need your components to stay where they're supposed to. These lightweight spacers come in 3/8", 1/2", and 5 mm hex bores to accommodate the most common shaft types They can also be used on round shafts and bolts (5mm is great for #10 hardware!). If you need to space a lot grab some 1" spacers. If you need ultimate precision pick up some 0.063" spacers. Not sure which spacers you need? Keep a handful of all six sizes in your shop and never go hungry for spacers again! 

     

    These spacers are molded in black polycarbonate, a tough, crack resistant material that FIRST teams are familiar with. These spacers should resist stress cracking. If polycarbonate isn't rugged enough for your high load application or you need custom length spacers, check out our Aluminum Hex Spacer Extrusion.

     

    Specifications

     

    • Inside Diameter: 0.375 in. Hex, 0.50 in. Hex, 5 mm Hex
    • Length: 0.063 in., 0.125 in., 0.188 in., 0.250 in., 0.375 in., 0.50 in., 1.00 in.
    • Material: Polycarbonate
    • Outside Diameter: 0.787 in. Round
    • Weight: Up to 0.014 lbs

    AndyMark 775 RedLine Motor with 16 Tooth 57 Sport Pinion Gear Installed

    #am-3775a_16t
    $42.00
    (En stock)

    This updated version of the AndyMark 775 RedLine Motor is an even faster and more powerful version of this popular 775-class motor platform. With a power rating of up to 363W, this motor is capable of delivering even more immense power in the same small lightweight package over the previous version. This ball-bearing supported, air cooled motor is best used in high-speed applications where the motor will not be stalled for long periods such as shooters, conveyors, and intake mechanisms. With sufficient care and attention to your application's traction limit, this motor can be effective in FRC drive applications as well.


    This variation of the RedLine comes with a 16 tooth, 0.7 Module pinion and mounting screws (am-3768) already installed allowing this motor to be installed into either a 57 Sport or a Dual 775 Sport gearbox. Not only does this take the risk of damaging the motor during pinion installation out of your hands, it also means that this counts as a COTS part in FRC.

    Logitech Gamepad F310

    #am-2064
    $39.98
    (En stock)

    A familiar button layout brings console-style control to your robot controls. No matter what the FIRST FRC game, you’ll have control for every race, battle or tournament. Button customization, multiple controller configurations, printable gaming profiles—it’s your game, your way. All the controls are just where you expect them to be thanks to the standard button layout of this gamepad.

    Specifications:

    XINPUT MODE:

    • A, B, X, Y buttons
    • LB, RB buttons
    • Left and right analog triggers
    • Start and Back buttons
    • Two clickable analog mini-joysticks
    • 8-way D-pad
    • Home button
    • Sports mode

    DIRECTINPUT MODE:

    • 10 programmable buttons*
    • Programmable left and right triggers*
    • Two programmable analog mini-joysticks*
    • 8-way programmable D-pad*
    • Sports mode