Composants électriques
This four gauge power cable is used on the robot to connect a 120 Amp Breaker (am-0282) and a Power Distribution Panel (am-2856) to a power component. This multi-strand wire is securely crimped and protected with heat shrink tubing. The tip-to-tip length is approximately five inches. This cable is used in the 4 Gauge Robot Power Cable Kit. Both end connectors of cable are crimped with a 6-ton pneumatic linkage crimping tool, and utilizes an Anderson SB120 for connecting to your power source.
Specifications:
This four gauge power cable is used to connect a 120 Amp Breaker (am-0282) to a Power Distribution Panel (am-2856). This multi-strand wire is securely crimped and protected with heat shrink tubing. The tip-to-tip length is approximately five inches. This cable is used in the 4 Gauge Robot Power Cable Kit. Both end connectors of cable are crimped with a 6-ton pneumatic linkage crimping tool.
Specifications:
Snap action breakers are used commonly in mobile robot applications such as FIRST Robotics Competition power distribution boards. We offer several amperage versions.
Snap action breakers are used commonly in mobile robot applications such as FIRST Robotics Competition power distribution boards. We offer several amperage versions.
AndyMark heat shrink tubing in an assorted variety.
Included Hardware:
Tip-to-tip length is approximately 12.6 inches.
This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.
This is a handy cable to connect the 120 amp breaker to the Power Distribution Panel. The cable is made of 6 gauge multi-strand wire while the connectors are securely crimped and protected with heat shrink tubing. The tip-to-tip length is approximately 5 inches. This cable is used in the Robot Power Cable Kit. Both end connectors of cable are crimped with a 6-ton pneumatic linkage crimping tool.
Specifications:
Included Hardware:
Six gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.
Red jacketed cabling is typically used on the positive leg while black is used for ground wiring. Six gauge wires come in rigid PVC insulation or flexible EPDM. Pick your color and pick your insulation type and let your wiring dreams come true.
SKUs:
Six gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.
Red jacketed cabling is typically used on the positive leg while black is used for ground wiring. Six gauge wires come in rigid PVC insulation or flexible EPDM. Pick your color and pick your insulation type and let your wiring dreams come true.
SKUs:
The AM Mag Encoder is designed for a wide range of uses. This is the fastest encoder AndyMark sells with a rating of ~30,000 RPM. It features a 1024 quadrature encoder output, an index pulse, and a pulse width varied position output. The board provides mounting for M3 screws, spaced 1 in. apart.
With the RedLine Encoder Kit (am-3773), this encoder can be added to any 775 motor with a 5mm back shaft, such as the AndyMark RedLine Motor.
Specifications:
Our Robot Signal Light is designed to work with the robo-RIO's RSL port to provide a quick visual indicator of robot status. This is not the 855PB-B12ME522 light specified by R70 of the 2017 FIRST Robotics Competition manual, but it does provide similar functionality.
We're offering this product so teams can use all the diagnostic features of the robo-RIO at an affordable price when legality and compactness isn't a priority. Our light housing is larger, and it is wired with two spade connectors. There is no polarity on the light housing, so it is not possible to wire backwards.
To wire this light, we recommend our 2-wire cable (am-2133) and either soldering to the spade connections or using a female spade connector available separately.
Specifications:
This is the perfect fit to connect any 12V Lead Acid Battery, like the MK ES17-12 to either our 1-Bank or 3-Bank chargers. It also helps connect the Battery Beak to 12V Lead Acid or 7.2V/9.6V/12V NIMH batteries. You can connect to a battery with our Battery Cable installed, and connect to your needs using the Alligator Clips. On the Anderson Power Connector end, the connectors are crimped with a 6-ton pneumatic crimping tool, the others are crimped to Alligator Clips for easy attachment to terminals.
Specifications:
Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your
existing motors to the REV Robotics Expansion Hub.
Connections:
A string potentiometer is a great way to detect position and travel for a robot mechanism. Spring-tension inside the enclosure ensures the string retracts as your mechanism does.
Note: The color of the enclosure will vary.
AndyMark heat shrink tubing in an assorted sizes. Shrinks at a 2:1 ratio.
Included Items: