Composants électriques
NOTE: This product is not included in any Sales or Discounts.
This is the PD panel being used in the 2015 FIRST Robotics Competition Kit of Parts.
The Power Distribution Panel (PDP) from Cross the Road Electronics is the latest DC power interface for competition robotics. The PDP uses CAN to connect directly to the roboRIO and allows for individual current monitoring on each channel.
Replacement 20 Amp Mini Yellow Fuse (am-3605) & 10 Amp Mini Red Fuse (am-4053) are available as well.
Please contact Cross the Road Electronics [email protected] for warranty issues or Return Merchandise Authorization (RMA) for this product.
For the most up to date documentation on this product, please see: https://www.ctr-electronics.com/pdp.html#product_tabs_technical_resources
Inputs:
Outputs:
This Power Supply AC/DC Adapter takes 100-240V AC and converts it to 12VDC at
1Amp maximum.
The barrel plug on this adapter perfectly fits the OM5P-AN radio, as well as the
D-Link Radio and our Arduino compatible Ethernet Microcontroller.
Features and Specifications:
This is a kit of loose Anderson Power Products (APP) Powerpole (model PP45) connector hardware, aimed at providing a robot builder some tools to make dis-connectable cables and wires. This kit contains 100 Red Housings, 100 Black Housings and 200 Contacts.
This kit provides the connecting hardware needed to make 100 Ground/12V pairs that are easily removable.
The contacts are rated for 45 amps, and sized for 10-12 gauge wire. Use this Powerpole Crimper for good connection.
Included Hardware:
This is a kit of loose Anderson Power Products (APP) Powerpole (model PP45) connector hardware, aimed at providing a robot builder some tools to make dis-connectable cables and wires. This kit contains 50 Red Housings, 50 Black Housings and 100 Contacts.
This kit provides the connecting hardware needed to make 50 Ground/12V pairs that are easily removable.
The contacts are rated for 45 amps, and sized for 10-12 gauge wire. Use our Powerpole Crimper for good connection.
Included Hardware:
This is a kit of loose Anderson Power Products (APP) Powerpole (model PP45) connector hardware, aimed at providing a robot builder some tools to make dis-connectable cables and wires. This kit contains 8 Red Housings, 8 Black Housings and 16 Contacts.
This kit provides the connecting hardware needed to make 4 Ground/12V pairs that are easily removable.
The contacts are rated for 45 amps, and sized for 10-12 gauge wire. Use our Powerpole Crimper for good connection.
Included Hardware:
An adjustable potentiometer is an analog device where you turn the pot and the resistance changes. Connect voltage to a pin, GND to the other, and the signal pin will have a voltage that varies from 0 to your input voltage depending on the rotation of the pot.
Specifications:
This is a bundle of PWM cables. 20 gauge wire is used in these cables, and
the body of the cable is jacketed with black heat shrink tubing. Notice that
these are not 3-wire ribbon cables, like all other PWM cables. Universal servo
connectors are on each end, with a female connector on one end and a male on the
other.
Specifications:
Included Hardware:
This is a bundle of PWM cables. 20 gauge wire is used in these cables, and the body of the cable is jacketed with black heat shrink tubing. Notice that these are not 3-wire ribbon cables, like all other PWM cables. Universal servo connectors are on each end, with a female connector on one end and a male on the other.
Specifications:
Included Hardware:
This is a PWM cable, also known as a "servo extension cable." 22 gauge wire is used in these cables, and the body of the cable is jacketed with black heat shrink tubing. Notice that these are not 3-wire ribbon cables, like all other PWM cables. Universal servo connectors are on each end, with a female connector on one end and a male on the other.
Crimp Tool and PWM standard housings and pins to crimp on to 22-28 AWG wire.
Enough for 50 PWM connectors and 100 Pins of both Male and Female variety.
Kit Includes:
0.1 in. - spaced connectors commonly used as the PWM (Pulse Width Modulation) Connectors on mobile robots and a simple controls method for many speed controllers.
25 crimp connector housings that would hold 3 pins at a 0.1 in. spacing are included as well as 100 FEMALE Pins that would be crimped on 22-28 AWG wires and snapped into the crimp connector housings.
Be sure to get a proper PWM crimp connector to be sure your connections are tight.
0.1 in. - spaced connectors commonly used as the PWM (Pulse Width Modulation) Connectors on mobile robots and a simple controls method for many speed controllers.
25 crimp connector housings that would hold 3 pins at a 0.1 in. spacing are included as well as 100 MALE Pins that would be crimped on 22-28 AWG wires and snapped into the crimp connector housings.
Be sure to get a proper PWM crimp connector to be sure your connections are tight.
This is a PWM Y-cable, also known as a "Y servo extension cable". 3-wire "Y"-cables allow 2 motors/servos to be driven by a single microcontroller output. 22 gauge wire is used in these cables, and the body of the cable is jacketed with black heat shrink tubing. Notice that these are not 3-wire ribbon cables, like other PWM cables. Universal servo connectors are on each end, with a male connector on one end wired to two ends with female connectors.
Specifications:
This is a PWM Y-cable, also known as a "Y servo extension cable". 3-wire "Y"-cables allow 2 motors/servos to be driven by a single microcontroller output. 22 gauge wire is used in these cables, and the body of the cable is jacketed with black heat shrink tubing. Notice that these are not 3-wire ribbon cables, like other PWM cables. Universal servo connectors are on each end, with a male connector on one end wired to two ends with female connectors.
This is a PWM Y-cable, also known as a "Y servo extension cable".
3-wire "Y"-cables allow 2 motors/servos to be driven by a single microcontroller output.
22 gauge wire is used in these cables, and the body of the cable is jacketed with black heat shrink tubing. Notice that these are not 3-wire ribbon cables, like other PWM cables.
Universal servo connectors are on each end, with a male connector on one end wired to two ends with female connectors.
Specifications:
Create your own custom length PWM cables with this kit. This kit allows you to make ends for custom length PWM cables, with a single cable up to 10ft long. Not shown in the picture is that there is plenty of extra pins in case you damage a few, or want to remake.
Kit Includes:
This is a customizable length Red or Black cable made of 6 gauge multi-strand
wire with the connectors securely crimped and protected with heat shrink tubing.
Both ends include the 1/4" diameter crimped ring terminals.
The selected cable length can be between 6" and 36". Simply select your desired
length from the drop-down menu on the right to choose the overall length of this
cable. The accuracy of all of this cable lengths will be +/- 1".
Specifications: