Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Fraisage CNC

    Fraisage CNC
    Voir comme Grille Lister
    Trier par
    Affichage par page

    Tormach 1100M CNC MILL - Entry Package

    #37752-EP
    Demander un devis

    The 1100M Entry Package consists of the 1100M CNC Mill and PathPilot Controller. A no-frills choice that requires you to provide a monitor, vise, tool holders, and tooling to fully commission. If hacking your setup sounds like fun, this might be the package for you.

     

    Includes:

     

    Tormach 1100M - Compact 3-Axis CNC mill with PathPilot controller

    TTS Adapter Collet: R8

    1100M Machine Owner's Kit

    Manual Oil Pump

     

     

    Tormach 1100M CNC MILL - Premium Package

    #37752-PP
    Demander un devis

    The 1100M Premium Package build on the Standard Package by boosting performance with an automatic tool changer, active probe, and electronic tool setter, you’ll be CNC milling in style with your very own 1100M.

     

    Includes:

     

    Tormach 1100M - Compact 3-Axis CNC mill with PathPilot controller

    TTS Adapter Collet: R8

    1100M Machine Owner's Kit

    1100M / 1100MX Stand

    1100M Chip Tray

    Manual Oil Pump

    1100M Enclosure Kit

    Lifting Bar Kit

    Machine Way Oil (1 Gallon)

    FogBuster Coolant Kit (230 Vac) for 1100M/1100MX

    DuraKut 9000B Mist Coolant

    PathPilot Controller - Rev. C

    Touch Screen Kit

    Waterproof Mouse

    Waterproof Mini-Keyboard

    Jog Shuttle Controller

    Controller Arm

    Power Drawbar Kit for 1100M / 770M

    Automatic Tool Changer for the 1100M

    Passive Probe Kit

    Electronic Tool Setter

    5 in. (127 mm) CNC Vise

    TTS™ CNC Operator Set with Tormach Tool Assistant

    End Mill Kit for Aluminum #1

     

     

    Tormach 1100M CNC MILL - Standard Package

    #37752-STP
    Demander un devis

    Take the 1100M Starter Package, then move on up with the convenience of a power drawbar and the safety and cleanliness of an enclosure. It’s the 1100M Standard Package.

     

    Includes:

     

    Tormach 1100M - Compact 3-Axis CNC mill with PathPilot controller

    TTS Adapter Collet: R8

    1100M Machine Owner's Kit

    1100M / 1100MX Stand

    1100M Chip Tray

    Manual Oil Pump

    1100M Enclosure Kit

    Lifting Bar Kit

    Machine Way Oil (1 Gallon)

    PathPilot Controller - Rev. C

    Standard LCD Monitor

    Waterproof Mouse

    Waterproof Mini-Keyboard

    Jog Shuttle Controller

    Controller Arm

    Power Drawbar Kit for 1100M / 770M

    Clamp Kit for 5/8 in. T-Slots (58 Pcs.)

    5 in. (127 mm) CNC Vise

    TTS™ CNC Operator Set with Tormach Tool Assistant

    End Mill Kit for Steel #1

     

     

    Tormach 1100M CNC MILL - Starter Package

    #37752-SP
    Demander un devis

    The 1100M Starter Package has everything you need to get started. Comes with a mill, stand, tooling, and PathPilot Controller, control arm, monitor, keyboard, mouse and jog shuttle controller.

    Includes:

     

    Tormach 1100M - Compact 3-Axis CNC mill with PathPilot controller

    TTS Adapter Collet: R8

    1100M Machine Owner's Kit

    1100M / 1100MX Stand

    1100M Chip Tray

    Manual Oil Pump

    1100M Backsplash Kit

    Lifting Bar Kit

    Machine Way Oil (1 Gallon)

    PathPilot Controller - Rev. C

    Standard LCD Monitor

    Waterproof Mouse

    Waterproof Mini-Keyboard

     

    Jog Shuttle Controller

    Controller Arm

    TTS™ CNC Operator Set with Tormach Tool Assistant

     

    TORMACH 1100MX STANDARD PACKAGE

    #39314-STD
    Demander un devis

    The 1100MX Standard Package includes a stand, enclosure, power drawbar, touchscreen, tooling, and more.

     

    The 1100MX has a trio of servo motors, an encoder for rigid tapping, and a BT30 spindle

     

    Faster travel speeds cut down program times, and a beefier spindle chews through aluminum, titanium, hardened steels, and alloys without concern of tool pullout.

     

    Add on with with plug-and-play accessories like a 4th axis, an automatic tool changer, and the PathPilot Operator Console.

     

    Includes:

     

    1100MX Mill

    PathPilot Controller - Rev. C

    Power Drawbar Kit

    Touch Screen Kit

    Waterproof Mouse

    Waterproof Mini-Keyboard

    Jog Shuttle Controller

    Controller Arm

    1100MX Machine Owner's Kit

    1100M / 1100MX Stand

    Chip Tray - Required for 1100MX

    1100MX Enclosure Kit

    PathPilot Controller

    Manual Oil Pump

    Lifting Bar Kit

    BT30 Operator's Kit (Inch)

     

     

    Tormach 770M CNC MILL - Entry Package

    #38251-EP
    Demander un devis

    The Tormach 770M is a Compact 3-Axis CNC mill with PathPilot controller. This package includes mill, controller, and owners kit.

     

    Includes:

     

     

    770M Mill

    770M Machine Owner's Kit

    Manual Oil Pump

    PathPilot Controller - Rev. C

     

    Tormach 770M CNC MILL - Standard Package

    #38251-STP
    Demander un devis

    Take the 770M Starter Package, then move on up with the convenience of a power drawbar and the safety and cleanliness of an enclosure. It’s the 770M Standard Package.

     

    Includes:

     

    770M Mill

    770M Machine Owner's Kit

    770MX / 770M Stand

    770M Chip Tray

    Manual Oil Pump

    770M Enclosure Kit

    PathPilot Controller - Rev. C

    Standard LCD Monitor

    Waterproof Mouse

    Waterproof Mini-Keyboard

    Jog Shuttle Controller

    Controller Arm

    Power Drawbar Kit for 1100M / 770M

    Clamp Kit for 5/8 in. T-Slots (58 Pcs.)

    5 in. (127 mm) CNC Vise

    End Mill Kit for Aluminum #1

    End Mill Kit for Steel #1

    TTS™ CNC Operator Set with Tormach Tool Assistant

    Lifting Bar Kit

    Machine Way Oil (1 Gallon)

     

     

    Tormach 770M CNC MILL - Starter Package

    #38251-SP
    Demander un devis

    The Tormach 770M is a Compact 3-Axis CNC mill with PathPilot controller. The Starter Package for the 770M has everything you need to get started. Comes with a mill stand, tooling, and PathPilot controller.

     

    Includes:

     

    Tormach 770M CNC mill

    PathPilot Controller - Rev. C

    Standard LCD Monitor

    770M Machine Owner's Kit

    770MX / 770M Stand

    Controller Arm

    Lifting Bar Kit

    770M Chip Tray

    Manual Oil Pump

    5" (127 mm) CNC Vise

    TTS CNC Operator Set with Tormach Tool Assistant

    Machine Way Oil (1 Gallon)

    Waterproof Mouse

    Waterproof Mini-Keyboard

    Jog Shuttle Controller

    Controller Arm

    Tormach 770MX - Standard Package

    #39315-SP
    Demander un devis

    The 770MX is equipped with a trio of servo motors, an encoder for rigid tapping, and a BT30 spindle. Faster travel speeds cut down program times, and a beefier spindle chews through aluminum, titanium, hardened steels, and alloys without a concern of tool pullout.

     

    The 770MX Standard Package includes a stand, enclosure, power drawbar, touchscreen, tooling, and more.

     

    Includes:

     

    770MX Mill

    770MX / 770M Stand

    770MX Chip Tray

    770MX Enclosure Kit

    Manual Oil Pump

    Lifting Bar Kit

    770MX Owner's Kit

    PathPilot Controller - Rev. C

    Touch Screen Kit

    Waterproof Mouse

    Waterproof Mini-Keyboard

    Jog Shuttle Controller

    Controller Arm

    BT30 Operator's Kit (Inch)

     

     

     

     

     

     

     

    Tormach PCNC 440 CNC Mill - Entry Package

    #37236-EP
    Demander un devis

    Tormach’s PCNC 440 Entry Package is the foundation that you will need to get started. This package includes mill, controller, and owners kit.

     

    Includes:

     

    PCNC 440 Mill

    Machine Owner's Kit for PCNC 440

    PathPilot Controller for 15L Lathe and PCNC Mills

     

    Note: This item will incur additional freight charges that will be quoted.

     

    Tormach PCNC 440 CNC Mill - Premium Package with ATC

    #37236-PP
    Demander un devis

    This is the Premium Package build that boosts performance with the addition of an automatic tool changer. You’ll not only save time, but you will be milling in style with this package.

     

    Includes:

     

    PCNC 440 Mill

    Machine Owner's Kit for PCNC 440

    PathPilot Controller for 15L Lathe and PCNC Mills

    Standard LCD Monitor

    PCNC 440 Stand

    PCNC 440 Chip Pan

    PCNC 440 Enclosure Kit

    Machine Way Oil (1 Gallon)

    Waterproof Mini-Keyboard

    Cable Kit for Tormach PCNC Mills

    Jog Shuttle Controller

    Waterproof Mouse

    Controller Arm

    Automatic Tool Changer for PCNC 440

    PCNC 440 Power Drawbar Kit

    4 in. CNC Vise

    Clamp Kit for 3/8 in. T-Slots (58 Pcs.)

    Flood Coolant Kit for PCNC 440

    QualiChem XTREME CUT 251C

    TTS™ CNC Operator Set with Tormach Tool Assistant

    Cutting Tool Starter Set #2

     

    Note: This item will incur additional freight charges that will be quoted.

    Tormach PCNC 440 CNC Mill - Starter Package

    #37236-SP
    Demander un devis

    The Starter Package for the PCNC 440 builds on the basics of the Entry Package by adding on a stand, chip pan, controller arm, monitor, keyboard, mouse, tooling, and vise.

     

    Includes:

     

    PCNC 440 Mill

    Machine Owner's Kit for PCNC 440

    PCNC 440 Stand

    PCNC 440 Chip Pan

    Machine Way Oil (1 Gallon)

    PathPilot Controller for 15L Lathe and PCNC Mills

    Standard LCD Monitor

    Waterproof Mini-Keyboard

    Jog Shuttle Controller

    Waterproof Mouse

    Controller Arm

    4 in. CNC Vise

    Manual Operator Set (Inch)

    Cutting Tool Starter Set #1

     

    Note: This item will incur additional freight charges that will be quoted.

    Tormach® 770M CNC MILL - Premium Package

    #38251-PP
    Demander un devis

    The 770M Premium Package build on the Standard Package by boosting performance with an automatic tool changer, active probe, and electronic tool setter, you’ll be CNC milling in style with your very own 770M.

     

    Includes:

     

    770M Mill

    770M Machine Owner's Kit

    770MX / 770M Stand

    770M Chip Tray

    Manual Oil Pump

    770M Enclosure Kit

    PathPilot Controller - Rev. C

    Touch Screen Kit

    Waterproof Mouse

    Waterproof Mini-Keyboard

    Jog Shuttle Controller

    Controller Arm

    Power Drawbar Kit for 1100M / 770M

    Automatic Tool Changer for the 770M

    Passive Probe Kit

    Electronic Tool Setter

    5 in. (127 mm) CNC Vise

    End Mill Kit for Aluminum #1

    TTS™ CNC Operator Set with Tormach Tool Assistant

    Lifting Bar Kit

    FogBuster Coolant Kit (115 Vac) for 770M/770MX

    DuraKut 9000B Mist Coolant

    Machine Way Oil (1 Gallon)

     

    CNC Machine Assembly Service

    #ST-SS
    Demander un devis

     

    Studica Assembly Services
     

    Tormach:

    Tormach has a long-standing philosophy of providing the most value to our customers. That’s why you have the ability to self-service, we have free technical support for as long as you own your machine, and you can take delivery of a mill, lathe, plasma table, or router via a liftgate truck. Those perks mean that there is some assembly required when you receive your machine. If you have a stand or enclosure, those will need to be assembled, or if you ordered any accessories, like an ATC, those will need to be installed, once your machine arrives.

    If you are a larger business, school, or simply do not have the time to commit to assembling your machine and installing accessories (time is money, after all), we offer an assembly service for a reasonable fee. Let us assemble your new machine here at Studica, and we will build it and ship it out to you. With machine assembly, a Studica professional installs, aligns and tests major components of the machine, allowing you to commission the machine quickly at your shop once it arrives.

    Assembly Service for Ontario includes delivery via Machinery Mover.  Assembly Services outside of Ontario require additional Crating Charges for Freight Delivery.
     

    CAMaster:

    Studica professionals will install all required accessories for CAMaster CNC Routers.  Machine Enclosures will be assembled and installed on-site.  The best method of delivery and setup will be discussed with each customer.  Crating Charges for CAMaster Routers are already factored in to delivery costs.  Orders outside of Quebec and Ontario require additional charges for on-site enslosure assembly.
     

    Please let us know if you have any questions about on-site assembly or setup.

    PCNC 440 Stand

    #35671
    Demander un devis

    This heavy-duty steel stand provides a rigid foundation for your PCNC 440 and space to safely store the PathPilot controller. In addition, you can easily:

    • Level the machine with the stand’s adjustable feet
    • Move the stand using co mmon pallet jacks

    Some assembly required.

     

    Compatibility

    What's In the Box?

    The flat-packed stand includes:

    • Leveling feet

    PCNC 440 Chip Pan

    #35673
    Demander un devis

    PCNC 440 Chip Pan Kit.