Fermer
Menu
toutes catégories
    (0) Soumission
    Vous avez pas d'articles dans votre panier.
    (0) Produits
    Vous avez pas d'articles dans votre panier.
    Menu
    Panier
    filtres
    préférences
    Rechercher
    PrécédentParallel Jaw Gripper Kit
    SuivantPathPilot Controller

    Passive Probe Kit

    Soyez le premier a tester ce produit

    The Passive Probe Kit is an economical probe that quickly and automatically sets work offsets using PathPilot’s integrated probing routines.

    # Pièce: 32309
    Demander un devis

    Quickly and automatically set work offsets using PathPilot’s integrated probing routines. Compatible with the Renishaw M4 stylus family, this economical kit features:

    • 3D touch trigger probe
    • Indicator light when triggered
    • Plug-and-play integration with Tormach mills

    Compatibility

    • 1100M
    • 770M
    • PCNC 1100
    • PCNC 770
    • PCNC 440

    Requirements

    • PathPilot controller
    • Regular cleaning of probe contacts (we recommend every three to six months, depending on your work environment)

    Specifications

    Measuring Direction ±X, ±Y, & +Z
    Repeatability 0.00059 in. (0.015 mm)
    Maximum Over-Travel In +Z + .1968 in. (5.0 mm)
    Maximum Angular Displacement ± 15°
    Radial (X-Y) Trigger Force 30-60 g
    Axial Trigger Force 500 ± 30 g
    Water Resistance IP66

    What's In the Box?

    In addition to the probe, the kit includes:

    • Cardboard box with fitted foam lining
    • Stainless steel probe tip
    • Factory inspection and certification report
    • Installation and maintenance instructions
    • Installation wrenches:
      • 2 mm hex
      • 2 mm pin
      • 2.5 mm hex
    • TTS Gauge Holder: 10 mm
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent

    A également acheté

    Photo de TTS ER Collet Holder ER16

    TTS ER Collet Holder ER16

    #31831
    Demander un devis

    TTS Toolholder for ER16 Collets.

    ER collets range in size from 3/64 in. - 3/8 in. (1 mm - 10 mm)

    Photo de PathPilot Controller for 15L Lathe and PCNC Mills

    PathPilot Controller for 15L Lathe and PCNC Mills

    #50848
    Demander un devis

    PathPilot Controller for Tormach PCNC 1100 Mill, PCNC 770 Mill, PCNC 440 Mill and 15L Slant-PRO Lathe.

     

    • Required for Tormach 15L Slant-PRO lathe and PCNC 440 Mill
    • Preloaded with PathPilot®2.0
    • Includes all applicable cables
    • Configurable for either 115 VAC or 230 VAC
    • Covered by 12 month Tormach Warranty

     

    NOTE: replacement for PN 35286

     

    Controller is NOT compatible with 770M/MX or 1100M/MX Mills, 1300PL Plasma Table.

    Photo de Shuttle Jog Controller

    Shuttle Jog Controller

    #30616
    $145.00

    Maximizes productivity with combination control of feed and positioning on all 4 axes (X, Y, Z, and A)

    Photo de PCNC 440 Chip Pan

    PCNC 440 Chip Pan

    #51499
    Demander un devis

    PCNC 440 Chip Pan Kit.

    Photo de TTS™ CNC Operator Set with Tormach Tool Assistant

    TTS™ CNC Operator Set with Tormach Tool Assistant

    #32284
    Demander un devis

    Tormach Tooling System CNC Operator's Set with Tool Assistant Set.

    Photo de Clamp Kit for 3/8 in. T-Slots (58 Pcs.)

    Clamp Kit for 3/8 in. T-Slots (58 Pcs.)

    #35509
    Demander un devis

    58 Piece Pro Quality Steel Clamp Kit.; Includes assortment of T-nuts, Studs, Strap Clamps, and Flange Nuts.

    • T-nuts fit standard 3/8" T-slots.
    • 5/16 in.-18 Studs
    Photo de Standard LCD Monitor

    Standard LCD Monitor

    #30615
    Demander un devis

    Standard LCD monitor for TORMACH CNC Machines.

    • LCD with LED backlighting
    • VESA/FDMI Mount compatible
    • Attaches directly to Tormach machine arm.
    Photo de SET - 4 in. CNC Vise

    SET - 4 in. CNC Vise

    #35285
    Demander un devis
    A versatile and compact 4 in. CNC Vise that can be mounted upright or on either side.
    Photo de Waterproof Mouse

    Waterproof Mouse

    #38722
    $35.00

    The Waterproof Mouse is an industrial-rated optical mouse with a waterproof, silicone surface.

    Photo de Waterproof Mini-Keyboard

    Waterproof Mini-Keyboard

    #38437
    $65.00

    The Waterproof Mini-Keyboard is a industrial-rated, compact keyboard with a waterproof, silicone surface.

     

    This compact, molded silicone keyboard is fully sealed and resists water, coolants, dirt, chips, and debris, making it ideal for use in manufacturing and production environments. Rated for industrial use and easy to clean, it operates in dirty and wet environments that would damage an ordinary keyboard and features:

    • Rigid back panel
    • Resistance rating of IP65
    • 6 ft (1.83 m) USB cord

    Quickly and automatically set work offsets using PathPilot’s integrated probing routines. Compatible with the Renishaw M4 stylus family, this economical kit features:

    • 3D touch trigger probe
    • Indicator light when triggered
    • Plug-and-play integration with Tormach mills

    Compatibility

    • 1100M
    • 770M
    • PCNC 1100
    • PCNC 770
    • PCNC 440

    Requirements

    • PathPilot controller
    • Regular cleaning of probe contacts (we recommend every three to six months, depending on your work environment)

    Specifications

    Measuring Direction ±X, ±Y, & +Z
    Repeatability 0.00059 in. (0.015 mm)
    Maximum Over-Travel In +Z + .1968 in. (5.0 mm)
    Maximum Angular Displacement ± 15°
    Radial (X-Y) Trigger Force 30-60 g
    Axial Trigger Force 500 ± 30 g
    Water Resistance IP66

    What's In the Box?

    In addition to the probe, the kit includes:

    • Cardboard box with fitted foam lining
    • Stainless steel probe tip
    • Factory inspection and certification report
    • Installation and maintenance instructions
    • Installation wrenches:
      • 2 mm hex
      • 2 mm pin
      • 2.5 mm hex
    • TTS Gauge Holder: 10 mm
    Les clients ayant acheté cet article ont également acheté
    Photo de TTS ER Collet Holder ER16

    TTS ER Collet Holder ER16

    #31831
    Demander un devis

    TTS Toolholder for ER16 Collets.

    ER collets range in size from 3/64 in. - 3/8 in. (1 mm - 10 mm)

    Photo de PathPilot Controller for 15L Lathe and PCNC Mills

    PathPilot Controller for 15L Lathe and PCNC Mills

    #50848
    Demander un devis

    PathPilot Controller for Tormach PCNC 1100 Mill, PCNC 770 Mill, PCNC 440 Mill and 15L Slant-PRO Lathe.

     

    • Required for Tormach 15L Slant-PRO lathe and PCNC 440 Mill
    • Preloaded with PathPilot®2.0
    • Includes all applicable cables
    • Configurable for either 115 VAC or 230 VAC
    • Covered by 12 month Tormach Warranty

     

    NOTE: replacement for PN 35286

     

    Controller is NOT compatible with 770M/MX or 1100M/MX Mills, 1300PL Plasma Table.

    Photo de Shuttle Jog Controller

    Shuttle Jog Controller

    #30616
    $145.00

    Maximizes productivity with combination control of feed and positioning on all 4 axes (X, Y, Z, and A)

    Photo de PCNC 440 Chip Pan

    PCNC 440 Chip Pan

    #51499
    Demander un devis

    PCNC 440 Chip Pan Kit.

    Photo de TTS™ CNC Operator Set with Tormach Tool Assistant

    TTS™ CNC Operator Set with Tormach Tool Assistant

    #32284
    Demander un devis

    Tormach Tooling System CNC Operator's Set with Tool Assistant Set.

    Photo de Clamp Kit for 3/8 in. T-Slots (58 Pcs.)

    Clamp Kit for 3/8 in. T-Slots (58 Pcs.)

    #35509
    Demander un devis

    58 Piece Pro Quality Steel Clamp Kit.; Includes assortment of T-nuts, Studs, Strap Clamps, and Flange Nuts.

    • T-nuts fit standard 3/8" T-slots.
    • 5/16 in.-18 Studs
    Informations
    Service Clients
    Mon compte
    Informations de contact
    Droit d'auteur et copie; 2024 Studica Limited. Tous les droits sont réservés.