Specifications:
This retainer clip is used to hold objects (such as gears) in place on shafts. Example: This product can be used to hold a gear onto a CIM motor shaft. Specification:
1/2 inch external retaining ring, used in the RAW Box. Specifications:
This retainer clip is used to hold objects (such as gears) in place on shafts. Example: This product can be used to hold a gear onto a PG71 motor shaft. Specification:
This retaining ring can be used on 6 mm D shafts to hold components in place. This is most useful on the shaft of NeveRest gearmotors & gearboxes. Product Overview:
This external retaining ring is used to fit into a groove on a 3/4" shaft. External Rings fit into the groove of a shaft. The portion of the ring that protrudes from the groove holds the assembly in place. Example: Within AndyMark products, this fastener is used to hold the FlexHub into gears and sprockets with 3/4" hex bore. Specification:
3/16" x 3/4" spring pin. Used in the WormBox gearbox. Specifications:
#35 Connecting Link (Master Link) Specifications:
#25 Connecting Link (Master Link) Specifications:
This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load. This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.