Ultrasonic proximity sensor, EZ0, MB1200, MaxBotix

This item can only be purchased in multiples of 25

Product Overview

These blind steel rivets are a perfect, strong choice for creating frames when using our 1in. Gussets paired with up to .125" wall aluminum tubing. These steel rivets won't let you down when you need them most!

Specifications

• Diameter: 3/16 in.
• Drill Size For Hole: #11
• Finish: Zinc
• Grip Range: 0.126-0.25 in.
• Head: Buttonhead
• Hole Size: 0.192-0.196 in.
• Length: 0.45 in.
• Mandrel Material: Steel
• Material: Steel
• Rivet Style: Blind
• Weight: 0.0094

This item can only be purchased in multiples of 25

Specifications: 

• Material: Steel
• Coating: Zinc Plated
• Thread: #10-32
• Thickness: 0.249"
• Thread: Fine
• Thread Size: 32
• Type: Nylon Insert Lock Nut
• Wrench Size: 3/8"

This item can only be purchased in multiples of 25

#10-32 x 0.5 in. long Socket Head Cap Screw

Specifications

• Finish: Zinc
• Head: Socket Cap
• Length: 0.5 in.
• Material: Steel
• Thread: 10-32
• Weight: 0.1 lbs

We are pleased to offer these new gussets that are suitable for 1" based building systems. These thoughtfully designed gussets are made from 1/8" thick 6061-T6 aluminum, which is a much stronger material than other 0.09" 5052 gussets. All of these framing gussets feature a 1" linear hole pattern, with holes suitable for either #10 screws or 3/16" rivets.

On all of the angle gussets, a generous radius was used on the inside corner for maximum strength. The various angle gussets, along with the quad and tee gusset are used together to create structures and sub-assemblies for your robot. Our bearing and Sport gussets are perfect building blocks to create a massive variety of mechanisms and assemblies to suit your needs.

Specifications

• Hole Pattern: Plates feature 0.20 in. Holes on a 1 in. Center to Center Spacing
• Material: 6061-T6 Aluminum
• Thickness: 0.125 in

Documents

Layout Print(s)

am-3860 90 Gusset REV2.PDF

am-4158 1IN Tee Gusset.PDF

am-4159 1IN Quad Gusset.PDF

am-4160 1IN 30deg Gusset.PDF

am-4161 1in 45deg Gusset.PDF

am-4162 1in 60deg Gusset.PDF

am-4163 1in 120deg Gusset.PDF

am-4164 1in 135deg Gusset.PDF

am-4165 1in 150deg Gusset.PDF

am-4166 1IN Sport Double Bearing Mount.PDF

am-4167 1IN 57Sport Side Mount Gusset.PDF

am-4168 1IN Bearing Side Mount Gusset.PDF

CAD File(s)

am-3860 90 Gusset REV2.STEP

am-4158 1IN Tee Gusset.STEP

am-4159 1IN Quad Gusset.STEP

am-4160 1IN 30deg Gusset.STEP

am-4161 1in 45deg Gusset.STEP

am-4162 1in 60deg Gusset.STEP

am-4163 1in 120deg Gusset.STEP

am-4164 1in 135deg Gusset.STEP

am-4165 1in 150deg Gusset.STEP

am-4166 1IN Sport Double Bearing Mount.STEP

am-4167 1IN 57Sport Side Mount Gusset.STEP

am-4168 1IN Bearing Side Mount Gusset.STEP

This is the "500EX Hex Hub" the bore is a 1/2" Hex Hole. It is a slightly different version of the 500 Hex Hub. It is manufactured differently, as it is extruded. Also, there is a 1.124" diameter boss on each side of the hub flange, providing a location for 1.125" bore flat sprockets. Are you having a hard time keeping your sprocket concentric with your hub? This hub is the trick.

This is the hub featured in the 2014 and 2015 Kit of Parts Drive Chassis and fits all AndyMark wheels. 

Specifications:

• Material: 6063 Aluminum
• Bore: 1/2" Hex
• Bolt Pattern: 0.204" diameter holes, evenly spaced on a 1.875" diameter bolt circle
• Outside diameter: 2.25"
• Weight: .088

This is the 8 in. SmoothGrip wheel. In 2010, the Gray 80A Durometer version was provided in the FRC Kit of Parts under the name "FIRST Wheel". No bearings are included.

New for 2021, you can now select a Blue 50A Durometer for maximum traction, or a Black 60A Durometer option.

Usage With Axle and Hub:

• If you wish to drive this wheel with an axle and hub, you can pick your hub by fitting any of the AndyMark hubs to this wheel. Hubs are not included with this wheel. If this is your choice, then no bearing is needed. To install a hub onto this wheel, use #10-24x3/4 thread forming screws.

Usage With Sprockets and Bearings:

• If you wish to drive this wheel with a sprocket, then the sprocket needs to be attached to the side of the wheel with #10-24x3/4 thread forming screws. You will also need to press ball bearings into the wheel so that it may spin on a shaft or bolt. The ball bearings must have a 1.125 in. od. For a 1/2 in. shafts, use am-0181. For a 3/8 in. shafts use am-0209.

Specifications

• Bolt Pattern: six holes (0.17 in. diameter) on a 1.875 in. diameter bolt circle.
• Bore: 0.95 in. diameter through hole, with two 1.125 in. diameter bearing pockets
• CoF: 1.0 static (on tight pile carpet)
• Diameter: 8 in.
• Durometer: 50A, 60A, 80A
• Material: black polycarbonate, urethane rubber
• Weight: 0.62 lbs

Documents

CAD File(s)

am-0420 8in Rubber Treaded Wheel.STEP

Layout Print(s)

am-0420 8in Smooth Grip Wheel.PDF

Don't see what you need?

See_all_our_guides,_drawings_and_CAD_files_here

The AM Mag Encoder is designed for a wide range of uses. This is the fastest encoder AndyMark sells with a rating of ~30,000 RPM. It features a 1024 quadrature encoder output, an index pulse, and a pulse width varied position output. The board provides mounting for M3 screws, spaced 1 in. apart. 

With the RedLine Encoder Kit (am-3773), this encoder can be added to any 775 motor with a 5mm back shaft, such as the AndyMark RedLine Motor. 

Specifications:

• Voltage: 5V
• Output: 1024CPR, Index, PWM Position
• RPM: ~30,000
• Weight: 0.0175 Pounds

This Heavy Duty (HD) omni wheel is a vast improvement over our older 6" omni wheels and other wheels on the market. The body has been totally redesigned with durability and mobility in mind. The design intent is to provide a smooth roll along with the ability to handle impacts very well.

The body is made from black polycarbonate, while the rollers are each molded with a nylon core and TPU tread. These rollers spin smoothly on a captured dowel pin.

Specifications: 

• Diameter: 6 inches
• Width Across Middle: 2.0"
• Bore: 1.125 inch diameter x 0.36" deep with a 0.96" diameter thru hole
• Bolt Pattern: 6 holes (0.157in) on a 1.875 inch bolt circle
• Body Material: Black polycarbonate
• Load Capacity: 120 pounds
• Weight: 0.99 Pounds
• Number of Rollers: 10
• Roller Material, Outside: Gray TPU rubber
• Roller Durometer: 77A
• Roller Material, Inside: white nylon
• Roller Bearing Material: nylon spinning on steel
• Roller Axle: 1/8" diameter steel dowel pin
• Assembled and Repairable by installing or removing 10-24 screws

Included Hardware:

• One - Interior polycarbonate body piece
• Two - Outer polycarbonate body pieces
• Ten - Rolles
• Ten - Steel Dowel Pins
• Ten - Thread Forming Screws

Usage: 

With Axle and Hub:

• To drive this wheel with an axle and hub, pick any of the AndyMark hubs to this wheel. Hubs are NOT included in the price of the wheel. No bearings are needed when driving with an axle.

With Sprocket:

• To drive this wheel with a sprocket, the sprocket needs to be attached to the side of the wheel with screws, and two ball bearings are to be pressed into the wheel, one on each side.

With Bearings, as a Caster:

• Bearings can be pressed in to the 1-1/8" diameter pockets on each side of the wheel. This setup creates a nice caster.

This sharp-cornered 6061-T6 aluminum extrusion is a robust and lightweight solution for custom robot frames and mechanism construction. 

Specifications:

• Length: 72" (+/- 1")
• Wall Thickness: 0.062"
• Exterior Corners: Sharp
• Material: 6061-T6 Aluminum
• Weight: 2.4 Pounds

Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket. 

The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.

Specifications:

• Material: 6005A Aluminum
• Inside diameter: 0.231 in.
• Outside width: 0.495 in. Hex, across flats
• Length: Selectable Above
• Weight: 0.16 lbs/ft