Pneumatics
This is a brass relief valve used in low-volume air tanks and pumps to retard excessive pressure buildup.
Specifications:
This is a steel sheet metal bracket designed to mount the phd, Inc. OCG cylinders (am-3303, am-3304, am-3305). It acts as a pivot mount for the front part of the cylinder.
Single solenoid pneumatic valve without fittings, manufactured by Mead Fluid Dynamics, Inc.
Mead part number: M4V210-06-12VDCFL
Three (3) straight 1/8 NPT fittings (or right angle 1/8 NPT fittings) are NOT INCLUDED with this part, but are needed to connect tubing to this valve.
This is the ultimate step in our pneumatics packages. Plenty of extras for backup parts and multiple actuation. All while creating pressurized air in a safe, manageable manner for mobile robots.
VIAIR 90C compressor (air pump) offers a light duty solution for smaller air requirements. These compact compressors and are meant to fill no larger than a 1.0 gallon air tank.
VIAIR part number 00090
Specifications:
Hardware:
Fill Rate
Products to be used on:
For VIAIR compressor warranty replacements contact Ryan Shaw.
This is a miniature pressure gauge with two 1/4 in. push to connect fittings for in line installations. It is perfect for lightweight pneumatic systems where you need to mount a pressure gauge in line with a tubing run. This pressure gauge is significantly reduced in volume and weight compared to the classic gauges used in FRC. This lets you take advantage of every last cubic inch and ounce on your robot.
This is a pneumatic meter-out flow control valve. The port is a 1/8" NPT male thread, and 1/4" diameter tube can be pressed in to the push-to-connect fitting.
Meter-out allows for the flow to be controlled in one direction, while the opposite flow is not restricted.
This is a double solenoid, air-piloted, compact valve made by CKD. It's great for efficiently providing air to a small to medium sized actuator on mobile robots. This valve does not have any sort of base, as it mounts directly on the CKD manifold base (am-3982). Unlike previous versions like this valve the signal wires are NOT able to disconnected from the valve. As such we don't recommend you try to remove them.
Compatible Fittings not Included:
CKD Information:
CKD part number: 4GA129R-M5-4
These double acting single rod stainless steel cylinders are a solid choice when you want air actuated motion. These cylinders have a strong 0.75 in. thick bore and are available in multiple stroke lengths.
CAD File(s)
This is a brass relief valve used in low-volume air tanks and pumps to retard excessive pressure buildup.
This is a blank cover fitting in where a valve would mount on the CKD manifold (am-3982). All 4 ports of the manifold are required to be covered by either a solenoid or by this cover.
040.5-R Bimba Cylinder
These double acting single rod stainless steel cylinders are a solid choice when you want air actuated motion. These cylinders have a strong 0.75 in. thick bore and are available in multiple stroke lengths.
These double acting single rod stainless steel cylinders are a solid choice when you want air actuated motion. These cylinders have a strong 0.75 in. thick bore and are available in multiple stroke lengths.
These double acting single rod stainless steel cylinders are a solid choice when you want air actuated motion. These cylinders have a strong 0.75 in. thick bore and are available in multiple stroke lengths.
VIAIR 330C-IG Compressor (air pump) is developed to fill air resovior tanks and features a heat dissipating head. These products are used on mobile competition robots and outdoor equipment.