Not just for golf, these balls are used in activities in the TETRIX® PRIME Builder’s Guide. These soft foam replacements might come in handy!  Quantity: pkg of 4

Jazz up your cars with our chrome axles. Nickel-coated steel axles create a finished look for race cars – plus the slick surface decreases the amount of friction produced. 1/8" x 70 mm.

3" Omni Wheels Pack have the ability to drive robotics forward and laterally with the use of 10 rollers. 

• Size: 3"
• Quantity: pkg of 2
• Material: nylon

TETRIX MAX Gear Pack includes all three sizes of the TETRIX Gears in this one pack.

• Four 40-tooth gears
• Two 80-tooth gears
• Two 120-tooth gears

Specs

• Quantity: 8 gears
• Outside Diameter: 33.75, 65.5, and 97.3 mm
• Inside Diameter: 8.0 mm
• Thickness: 6.3 mm
• Material: 7005 Aluminum

Tetrix Max Zip Tie Pack includes 11" flexible, nylon cable ties.

Allen Wrench L-Key Set feature a ProHold tip to make screwing and unscrewing faster and easier – even when the screw is at an awkward angle. Made of high-torque steel.

Comes in the following inch sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, and 5/32.

Axle Pack allows you to attach wheels and gears with these precision. Available in 100 mm and 250 mm lengths.

Tetrix Max Pen Screw Driver 4-in-1 is an adjustable screwdiver featuring two capped ends – an end with Phillips and flathead screwdrivers. Plus, each end features a small and extra-small size – just pull out each end and flip it around to the other style of head. Great for small projects and electronics. Features a clip to help keep it in your pocket, so you don’t lose this handy tool!

TETRIX MAX Tank Tread Sprockets are the drive system for tank treads. They can be attached to TETRIX DC motors, motor hubs, and servos. Each sprocket has 20 teeth.

• Quantity: pkg of 2
• Diameter: 65 mm
• Thickness: 15 mm
• Number of Teeth: 20
• Material: nylon

TETRIX MAX Tank Tread Idler Wheels provide rolling support for tank treads, these idler wheels can be used with standard TETRIX parts.

• Quantity: pkg of 2
• Diameter: 62.30 mm
• Thickness: 28.35 mm
• Material: nylon

TETRIX MAX Tank Tread Conveyor Paddles feature T-shaped ends that slide into the TETRIXTank Tread Chain Links to create conveyor-type mechanisms. With the TETRIX hole pattern, you can build scoops, levers, and other devices right on the paddles using standard TETRIX parts. Each paddle is 50 mm x 40 mm.

• Quantity: pkg of 24
• Nominal Size: 50 mm x 40 mm
• Material: nylon

TETRIX MAX Tank Tread Rubber Inserts give you extra grip. Their T-shaped ends slide into the TETRIX Tank Tread Chain Links for a secure fit.

• Quantity: pkg of 50
• Nominal Size: 39.85 mm x 6.30 mm
• Material: Neoprene rubber

4" Omni Wheel Pack have the ability to drive forward and laterally with the use of 10 rollers.

• Size: 4"
• Quantity: pkg of 2
• Material: nylon

TETRIX MAX Tank Tread Kit distributes weight more evenly than wheels, giving robots the traction needed to cover rough terrain or unstable ground such as sand. The treads can also be used to create conveyor belts. This kit provides everything needed to add up to 6.5 feet of tank tread to your robot. TETRIX chain links are made of highly durable acetal and snap together and apart with ease.

This high-value kit includes not only the tank tread parts but also all of the extra TETRIX parts required to attach the treads to a robot, requiring no additional parts from the TETRIX Base Set. Includes the following TETRIX components: 200 Tank Tread Chain Links, six Tank Tread Idler Wheels, four 32 mm channels, two Tank Tread Sprockets, 24 Bronze Bushings, twelve 1/8" Axle Spacers, 12 Axle Set Collars, and six 100 mm axles.

TETRIX MAX Wrench Packet enables users to hold kep nut and stand-off building components in place while assembling their robot.

TETRIX MAX Bevel Gear & Acetal Bearings includes two heavy-duty aluminum gears along with two acetal bearings that allow for the transfer of the direction of motion at 90 degrees.

• Quantity: pkg of 2 gears and 2 bearings
• Number of Teeth: 30
• Diameter: Bevel Gear diameter 59.87 mm
• Thickness: 10.85 mm
• Material: 7005 Aluminum gears, Acetal bearings

Acetal Bearings provide extra support when building mechanisms interact with heavy-duty loads.

• Quantity: pkg of 2
• Material: Molded acetal
• Nominal Size: 22 mm diameter x 9.25 mm

TETRIX MAX Battery Clips provide a safe and sturdy housing unit for the TETRIX battery pack.

• Quantity: pkg of 2
• Material: 7005 Aluminum

TETRIX MAX Servo Horn is heavy-duty aluuminum servo horn, which lends extra strength to your servo applications.

• Material: 7005 Aluminum

3" Hub/Tire adds some mobility to your robot.

• Size: 3"
• Diameter: 75.2 mm
• Tire Width: 25.4 mm
• Quantity: One
• Material: Nylon wheel with Neoprene rubber tire

Tetrix Max Gear 40T Pack is a step above kits and systems with plastic gears – these are made of heavy-duty aluminum and really stand up to wear and tear.

• Quantity: pkg of 2
• Number of Teeth: 40
• Outside Diameter: 33.75 mm
• Inside Diameter: 8.0 mm
• Thickness: 6.3 mm
• Material: 7005 Aluminum

TETRIX MAX Wheels adds some mobility to your TETRIX robot.

• Size: 4"
• Quantity: One
• Material: Nylon wheel with Neoprene rubber tire

Use this 10-cell, 12-volt rechargeable pack to bring long-lasting power to TETRIX^® motors and electronics. This 3,000 mAh NiMH pack features a built-in, 20-amp replaceable fuse for safety.

(THIS BATTERY IS FTC LEGAL)

TETRIX MAX Single Standard-Scale Servo Motor Brackets are heavy-duty aluminum brackets. Each holds one servo in place.

• Quantity: pkg of 2
• Material: 7005 Aluminum

TETRIX MAX Flat Brackets are perfect for connecting structural elements or for creating a servo leverage arm. Made of heavy-duty aluminum.

• Quantity: pkg of 2
• Nominal Size: 91 mm x 27 mm
• Material: 7005 Aluminum

TETRIX MAX L Brackets feaure 90º angles to connect structural elements. Made of heavy-duty aluminum.

• Quantity: pkg of 2
• Nominal Size: 27 mm x 31.5 mm x 31.5 mm
• Material: 7005 Aluminum

32MM Channels&nbspcan be cut to custom lengths with a metal-cutting blade.

• Size: 32 mm x 32 mm x 32 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

96MM Channel is a structual base for building with the Building System. It can also be cut to custom lengths with a metal-cutting blade.

• Size: 96 mm x 32 mm x 32 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

160mm Channel  can also be cut to custom lengths with a metal-cutting blade.

• Size: 160 mm x 32 mm x 32 mm
• Material: 7005 Aluminum

288mm Channel are heavy-duty aluminum channel pieces that can be cut to custom lengths with a metal-cutting blade.

• Size: 288 mm x 32 mm x 32 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

416MM Channel is a heavy-duty aluminum channel piece that serves as the structural base for building with the TETRIX Building System. This piece can also be cut to custom lengths with a metal-cutting blade.

• Size: 416 mm x 32 mm x 32 mm
• Quantity: One Channel
• Material: 7005 Aluminum

TETRIX MAX Flat Bars are 288 mm long and made of heavy-duty aluminum. These bars can also be cut to custom lengths with a metal-cutting blade.

• Dimensions: 288 mm x 16 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

Angle Pack are structural pieces featuring 90º angles and heavy-duty aluminum construction. Can be cut to custom lengths with a metal-cutting blade.

• Dimensions: 288 mm x 16 mm x 16 mm
• Material: 7005 Aluminum

144mm Angle Beam features structural pieces with 90º angles and heavy-duty aluminum construction. Can be cut to custom lengths with a metal-cutting blade.

• Quantity: pkg of 2
• Material: 7005 Aluminum

TETRIX MAX Flat Building Plates are 64 mm x 192 mm and made of heavy-duty aluminum. Can be cut to custom lengths with a metal-cutting blade.

• Size: 64 mm x 192 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

80MM Tube is both light and strong. TETRIX Tubes can be used as long extensions. Made of heavy-duty aluminum, they can also be cut to custom lengths with a metal-cutting blade.

• Length: 80 mm
• Outside Diameter: 15.7 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

145MM Tube Pack is light and strong with tubes that can be used as long extensions. Made of heavy-duty aluminum, they can also be cut to custom lengths with a metal-cutting blade.

• Length: 145 mm
• Outside Diameter: 15.7 mm
• Quantity: pkg of 2
• Material: 7005 Aluminum

Light and strong, the TETRIX Tubes can be used as long extensions. Made of heavy-duty aluminum, they come in three different sizes but can also be cut to custom lengths with a metal-cutting blade.

TETRIX MAX Tube Clamps are used to bolt TETRIX Tubes to structural elements. They feature heavy-duty aluminum construction.

• Quantity: pkg of 2
• Material: 7005 Aluminum

TETRIX MAX Motor Shaft Hubs attaches wheels and gears to motor shafts. Each hub comes with a screw and is made of heavy-duty aluminum.

• Quantity: pkg of 2
• Size: 6 mm
• Material: 7005 Aluminum
• Note: Includes 10-32 set screw

Tetrix Max Servo Extension gives your servo a little more room to roam with this extension.

Tetrix Max Servo Y Connector connects two servos to one channel.

120T Gear is a step above kits and systems with plastic gears. These are made of heavy-duty aluminum and really stand up to wear and tear.

• Quantity: one gear
• Number of Teeth: 120
• Outside Diameter: 97.3 mm
• Inside Diameter: 8.0 mm
• Thickness: 6.3 mm
• Material: 7005 Aluminum

80T Gear is a step above kits and systems with plastic gears – it is made of heavy-duty aluminum and really stands up to wear and tear. 

• Quantity: one gear
• Number of Teeth: 80
• Outside Diameter: 65.5 mm
• Inside Diameter: 8.0 mm
• Thickness: 6.3 mm
• Material: 7005 Aluminum

Specifications

• Quantity: pkg of 6
• Length: 100 mm
• Diameter: 4.7 mm
• Weight: 81 g per pack; 12.7 g per axle
• Size: 4.7 mm x 100 mm
• Material: 303/304 stainless steel
• Shaft: D-shaft

TETRIX MAX Motor Mount Pack attaches the DC Drive Motor to your robot. Includes the Motor Mount, two kep nuts, and two cap screws.

• Nominal Size: 72 mm x 12.7 mm
• Material: 7005 Aluminum

TETRIX MAX Gear Hub Spacers provides adequate spacing between wheels and gears. Includes four cap screws for each spacer.

• Quantity: pkg of 2
• Material: 7005 Aluminum