Specifications:
This is a Trilobe, thread forming, or thread rolling screw, ideal for applications where the screw is being threaded into plastic or metal. A flat washer is part of the 5/16 hex head, providing more surface area contact than a regular hex head. The increased bearing area decreases the likeliness of crushing mating surfaces. Trilobe, or Thread Rolling, screws have a blunt tapered point that requires a pre-drilled or punched hole; eliminates chips and permits replacement with standard screw. Zinc plating froms a zinc carbonate film that greatly retards the corrosion rate in a normal atmosphere, which is similar to the aluminum oxide film that forms on aluminum that accounts for its low corrosion rate. Product Overview:
1/2 inch external retaining ring, used in the RAW Box. Specifications:
This retainer clip is used to hold objects (such as gears) in place on shafts. Example: This product can be used to hold a gear onto a CIM motor shaft. Specification:
This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load. This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.
This bearing plate is a great way to mount 1.125 in. OD (FR8) into thin or weak material that otherwise could not tolerate or support a press-fit.
This heavy duty omni wheel is a vast improvement over our older 4" omni wheels and other wheels on the market. The body has been totally redesigned with durability and mobility in mind. The design intent is to provide a smooth roll along with the ability to handle impacts very well. The body is made from black polycarbonate, while the rollers are each molded with a nylon core and TPU tread. These rollers spin smoothly on a captured 1/8" x 1.875" dowel pin. This image shows how to attach the DuraOmni to the AM14U2 Specifications:
Included Hardware:
Usage: With Axle and Hub:
With Sprocket:
With Bearings, as a Caster:
The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
This simple bracket handles so many of your mounting needs! Mount motors or gearboxes anywhere and make axle supports with bearings - it's a do-it-all, put-it-anywhere bearing and motor mount bracket.
Any motor or gearbox with a 2-inch diameter bolt circle can be mounted in this bracket. The center hole is sized to hold a standard 1.125 inch outside diameter bearing.
Examples of motors with a 2 in. diameter bolt circle:
Examples of gearboxes with a 2 in. diameter bolt circle
Layout Print(s)
am-4244 1IN Pitch Bent Motor and Bearing Bracket REV2.PDF
CAD File(s)
am-4244 1IN Bent Bearing Side Mount Gusset.STEP
This gear is the CIM gear for the Toughbox and Toughbox Mini. Specifications:
FTC Note: This product is NOT legal for FTC, we recommend our Stealth Wheel. Product Overview: This is a 6" diameter wheel with a polycarbonate body and a TPU rubber "HiGrip" tread profile. This wheel features a 77A durometer tread material that is durable with long-life wear characteristics. Use this wheel for great tread life and good drivetrain response. We feel that these wheels are a more durable option for teams' drivetrains. While they provide good traction, they make for a maintenance-free wheel for the average team. Under normal circumstances we feel that these wheels will last most FIRST Robotics Competition teams the entire season. No bearings or hubs are included in this wheel. Specifications:
Usage:
With Axle and Hub:
With Bearings: