Panier

filtres

Menu personnel

préférences

Rechercher

Précédent6" DuraOmni Wheel with 1/2"...

Suivant6" Plaction Wheel with Blue...

6" Performance Wheel Bearing Bore

Soyez le premier a tester ce produit

The 6" Performance Wheel is a competition-proven design used by many top teams over the years. This wheel design incorporates a novel way of attaching tread, and also allows for sprockets to be mounted on both sides of the wheel. This wheel DOES NOT include tread material, which is available separately to tailor this wheel's performance to your application. Two 1.125" OD bearings, available separately, allow this wheel to ride smoothly on a dead (stationary) axle of your choosing.

For tread mounting instructions, click here!

Specifications:

Material: 6061 aluminum, machined from billet
Diameter: 5.60 inches, without tread (6.0 inches with tread, not included)
Weight: 0.57 pound
Uses 1" wide treads
Bore: 0.95" with 1.1245" id x 0.250" deep on either side
Load Capacity: 500 pounds*
Tread Mounting Holes: 6 threaded thru holes for #10-32 screw on a 1.875" dia bolt circle

* Load Testing: we applied 700 pounds on the location of the opening for the treads, and had no rim deflection.

Usage:
With Sprocket:

One sprocket on one side: To drive this wheel with a sprocket, (or to drive another wheel with propulsion from this wheel) then the sprocket needs to be attached to the side of the wheel, outside of a 250 Sprocket Spacer. Use Hardware Kit 3, which includes the screws for this.

Two sprockets, one on each side: One side of the wheel has no recess, so that side will only need a 250 Sprocket Spacer to space the sprocket out from the wheel. In order to put a sprocket on the other side, use a 550 Sprocket Spacer to get the sprocket out far enough so that the chain clears the edge of the wheel.

With Bearing:

Press a ball bearing into this wheel for a free spinning wheel or for use with a sprocket.. The ball bearing must have a 1.125" od. For a 1/2" id, use am-0030. For a 3/8" id, use am-0573.

With Axle and Hub:

This wheel can be driven by a an axle, if an AndyMark hub is attached to the wheel. Hubs are NOT included in the price of the wheel. If this is your choice, then no bearing is needed. To install a hub onto a 6" Performance Wheel, use Hardware Kit 3.

# Pièce: am-3868

$70.73

Disponibilité: 2 en stock

Quantité:

Commentaires

Écrivez votre propre commentaire

Le produit peut être examinée que après l'achat
Seul les utilisateurs enregistrés peuvent écrire une critique

Titre du commentaire:

texte du commentaire:

Notation:

Mal
Excellent

A également acheté

Sushi Roller Intake Wheels - 1/2 in. Hex, 60a (Black)

#am-4541_black

$6.00

(47 En stock)

The Sushi Roller Intake Wheels are an excellent choice for robot intakes, internal conveyors, feeder mechanisms, or anywhere you need a durable, compact and grippy roller. These rollers are made with a robust polycarbonate hex bore hub, so no external hub is necessary - just slide them onto a hex shaft, constrain them axially and you are good to go. Available in a range of durometers for a wide variety of applications, these cute little rollers are great for getting a grip on things!

Specifications

Bore: 0.5 in. Hex, 5 mm Hex, 0.375 in. Hex
Core Material: Polycarbonate
Diameter: 1 in.
Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
Tread Material: TPU
Weight: 0.022 lbs
Width: 1 in.

Sushi Roller Intake Wheels - 1/2 in. Hex, 40a (Orange)

#am-4541_orange

$6.00

Specifications

Bore: 0.5 in. Hex, 5 mm Hex, 0.375 in. Hex
Core Material: Polycarbonate
Diameter: 1 in.
Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
Tread Material: TPU
Weight: 0.022 lbs
Width: 1 in.

Plaction Wheel Tread Alligator Clips 8 Clips 4 Pins

#am-0894

$9.00

(En stock)

This product contains 8 Alligator Clips and 4 Pins, to create your own connections for tread. It will cover the needs for 4 complete Plaction wheels, or 4 connections in general.

We use these Clips to connect the tread on our Plaction wheels. You can use these clips to rebuild your damaged tread, or make your own lengths of tread for any wheels by getting 10' lengths of tread.

Documents

Guide(s)

am-0894 How Tread Clips Install.pdf

22AWG Bonded PWM cable, Black/Red/White, 10ft

#am-3162

$12.00

(10 En stock)

This is 22 AWG (gauge) bonded wire with Black/Red and White Jacketing. It lets you create your own length PWM cable.

Specifications

Gauge: 22
Length: 10 ft
Wire Jacketing: black/red/white (bonded together)

SPARK MAX CAN Cable (2 Pack)

#am-4472

$9.40

(10 En stock)

This version of the SPARK MAX CAN Cable bridges the H and L signals together. By doing this within the cable itself, the CAN Bus is less likely to break in disconnection from the SPARK MAX Motor Controller. One end is the JST-PH 4-pin connector, with the other splitting to one male and one female 0.1 in. 3-pin PWN. The CAN High is on the yellow wire and the CAN Low is on the green wire.

Pigeon 2.0

#am-3556a

$355.00

(0 En stock)

Pigeon is an IMU with 9 degrees of freedom, containing a 3-axis magnetometer, accelerometer, and gyro. The gyro has built-in temperature compensation. Pigeon provides a heading by sensor fusing all 9 measurements. It can be connected to the Talon SRX for power and communication via UART, or it can be wired to the CAN bus while powered from a separate 12V source. Pigeon has built-in compass compensation for hard-iron, soft-iron, and physical tilt. The Pigeon 2.0 eliminates the need for on-boot calibration and temperature calibration and does not require stillness upon boot-up.