Trier par
Positionner
Nom: A à Z
Nom: Z à A
Prix ??croissant
Prix: décroissant
Créé sur
Affichage
16
32
64
par page
# am-2263
$9,22
$9,32
(En stock)
This is to mount a pneumatic cylinder to your Shifters.
Specifications:
Material: Aluminum
Thickness: 0.29"
Weight: 0.025 pounds
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3534
$18,45
$18,64
(En stock)
Specifications:
Tooth Count: 18
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 0.9"
Face Width: 0.375"
Material: 4140 Steel
Bore: 0.375" Hex
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-2286
$23,06
$23,29
(En stock)
This is the Carrier Plate w/ Sun Gear for the AM Planetary gearbox. Five
planet gears (not included) ride on the dowel pins pressed into this part.
Referencing the picture above, those dowel pins are protruding out the bottom
side of the carrier plate.
Specifications:
Weight: 0.07 pounds
Diameter: 1-3/8"
Length: 15/16"
Tooth Count: 15
Diametral Pitch: 32
Pressure Angle: 20 degrees
Pin Diameter: 0.125"
Gear Material: 1117 Steel
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3535
$18,45
$18,64
(
4 En stock)
Specifications:
Tooth Count: 25
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.25"
Face Width: 0.5"
Material: 4140 Steel
Bore: 0.5" Hex
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-2358
$23,06
$23,29
(En stock)
Two of these plates make up the outsides and house the RAW Box.
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3536
$21,52
$21,74
(
0 En stock)
Specifications:
Tooth Count: 30
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.5"
Face Width: 0.357"
Material: 4140 Steel
Bore: 0.375" Hex
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-2359
$15,38
$15,53
(En stock)
The Plate spacer goes on the opposite side of the RAW box from the CIM Motor.
Specifications:
Material: 6061 Aluminum
Length: 3.5"
Height: 1"
Thickness: 0.312"
Weight: 0.07 Pounds
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-2386
$21,52
$21,74
(En stock)
This is the aluminum shaft plate for our 3 Motor Toughbox. A standard
Toughbox could be converted to a 3 Motor Toughbox by using this plate and also
the 3 Motor Toughbox Motor Plate.
Specifications:
Size: 5x5x0.125 inches
Material: 6061 Aluminum
Weight: 0.274 pound
Finish: Tumbled
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3537
$24,60
$24,85
(En stock)
Specifications:
Tooth Count: 34
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.7"
Face Width: 0.375":
Material: 4140 Steel
Bore: 0.375" Hex
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-2387
$23,89
$23,29
(En stock)
This is the aluminum motor mount plate for our 3 Motor Toughbox. A standard
Toughbox could be converted to a 3 Motor Toughbox by using this plate and also
the 3 Motor Toughbox Shaft Plate.
Specifications:
Size: 5x5x0.25 inches
Material: 6061 Aluminum
Weight: 0.528 pound
Finish: Tumbled
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3538
$26,14
$26,40
(En stock)
Specifications:
Tooth Count: 38
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.9"
Face Width: 0.375"
Material: 4140 Steel
Bore: 0.375" Hex
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3539
$27,68
$27,95
(En stock)
Specifications:
Tooth Count: 36
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.8"
Face Width: 0.438"
Material: 4140 Steel
Dog Profile: 4 Tooth, 90 Degrees Opposed
Bearing Bore: 1.124"
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-2457
$15,38
$15,53
(En stock)
This 1/8" thick plate supports the output shaft of the SpinBox gearbox. This plate has the same outer size as the SpinBox Housing.
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3540
$33,82
$34,17
(En stock)
Specifications:
Tooth Count: 46
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 2.25
Face Width: 0.438"
Material: 4140 Steel
Dog Profile: 4 Tooth, 90 Degrees Opposed
Bearing Bore: 1.124"
Weight: 0.24 Lbs
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-2463
$9,22
$9,32
(En stock)
This 1/8" thick plate supports the output shaft of the SpinBox gearbox. This plate has the same outer size as the SpinBox Housing.
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3541
$36,90
$37,27
(En stock)
Specifications:
Tooth Count: 52
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 2.6"
Face Width: 0.438"
Material: 4140 Steel
Dog Profile: 4 Tooth, 90 Degrees Opposed
Bearing Bore: 1.124"
Weight: 0.3 Lbs
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS