This product is designed to be placed between a high power 550 motor and the motor mount plate of a gearbox. It allows air to enter from the side and pass through the motor via the vent holes in the front face of the motor. Allowing this airflow typically requires machine time and customization of gearboxes. This simple lightweight spacer is the perfect solution for motor preservation.

Usage:

• When installing a motor to a gearbox motor plate, first place this spacer over the nose of the motor. Line the outer circle of holes in the spacer with the mounting holes of your 550 motor. Secure the the gearbox motor plate to the motor like normal.

Specifications:

• Material: 6061 Aluminum
• Thickness: 0.06 in.
• 4 holes 0.124 in. diameter on a 0.984 in. circle
• Weight: 0.002 lbs

This product is designed to be placed between an AndyMark RedLine Motor (am-3775) or high power 775 motor and the mount plate of a gearbox. It allows air to enter from the side and pass through the motor via the vent holes in the front face of the motor. Allowing this airflow typically requires machine time and customization of gearboxes. This simple lightweight spacer is the perfect solution for motor preservation. 

Usage:

• When installing a motor to a gearbox motor plate, first place this spacer over the nose of the motor. Line the outer circle of holes in the spacer with the mounting holes of your 775 motor. Secure the the gearbox motor plate to the motor. 

Specifications:

• Material: 5052 Aluminum
• Thickness: 0.06 in.
• 4 holes 0.165 in. diameter on a 1.14 in. circle
• Weight: 0.002 lbs

The 32mm Pulley Plate is one of two pulley plates available in the S3 Ecosystem. Two of these plates in conjunction with standoffs, screws, and a nub create an effective and robust winch, am-3729 (coming soon). 

It has a central bolt pattern for an AndyMark XL Nub (am-3441a) or the 0.770 in. bolt circle used with the Actobotics building system. The outside diameter of this plate matches the root diameter of a 24 Tooth Ninja Star Sprocket (am-3283). This allows it to be used as an idler chain guide.

Specifications:

• Material: 5052 Aluminum
• Weight: 0.019 Pounds
• Thickness: 2.29mm (0.09")
• Diameter: 1.782"
• Bore: 8mm
• Holes:
  • 6 holes, 0.150" in diameter on a 32mm (1.26") bolt circle
  • 4 holes, 0.150" in diameter on a 0.770" bolt circle
  • 4 holes, 0.150" in diameter on a 16mm (0.630") bolt circle

The 64mm Pulley Plate is one of two pulley plates available in the S3 Ecosystem. Two of these plates in conjunction with standoffs, screws, and a nub create an effective and robust winch, am-3728 (coming soon). 

It has a central bolt pattern for an AndyMark XL Nub (am-3441a) or the 0.770 in. bolt circle used with the Actobotics building system. There are three different bolt circles where you can attach standoffs. The different bolt circles can form different diameter pulleys from 32mm to 64mm. The outside diameter of this plate matches the root diameter of a 40 Tooth Ninja Star Sprocket (am-3285). This allows it to be used as an idler chain guide.

Specifications:

• Material: 5052 Aluminum
• Weight: 0.058 Pounds
• Thickness: 2.29mm (0.09")
• Diameter: 3.053"
• Bore: 8mm
• Holes:
  • 12 holes 0.150" in diameter on a 64mm (2.50") bolt circle
  • 6 holes, 0.150" in diameter on a 48mm (1.89") bolt circle
  • 6 holes, 0.150" in diameter on a 32mm (1.26") bolt circle
  • 4 holes, 0.150" in diameter on a 0.770" bolt circle
  • 4 holes, 0.150" in diameter on a 16mm (0.630") bolt circle

This output plate forms the structure of the DeCIMate Gearbox (am-3745) along with the DeCIMate Motor Plate (am-3693). This plate mimics the mounting features of a CIM motor meaning anywhere you could mount a CIM, there too the DeCIMate can go.

Specifications:

• Material: 6061-T6 Aluminum
• Thickness: 0.25 in.
• Length: 2.5 in.
• Height: 2.5 in.
• Weight: 0.089
• Finish: Anodized Red

This motor plate accepts one or two AndyMark 775 RedLine Motors (am-3775) for use in a DeCIMate Gearbox (am-3745). This plate forms the structure of the DeCIMate gearbox along with the Output Plate for DeCIMate (am-3692).

Specifications:

• Material: 6061-T6 Aluminum
• Thickness: 0.25 in.
• Length: 2.9 in.
• Height: 1.5 in.
• Weight: 0.06
• Finish: Anodized Red

The cross bracket is used to strengthen the AM14U4 frame to accomodate for a opening in the front or back of the chassis frame.

Specifications

• Height: 2.935"
• Length: 24"
• Material: 5052 Aluminum
• Overall Width: 2.5"
• Thickness: 0.125"
• Weight: 1.35 lbs

The Dremel Digilab 3D40 FLEX Idea Builder 3D printer is Dremel's best 3D printer for classroom use or to use at home. 3D printing beginners, teachers and students alike will appreciate the new removable flexible build plate that makes it quick and easy to remove finished parts after printing,