This USB Male to Female Panel Mount can be used to connect to the roboRIO on FRC robots and provide easy to access plugs. If your robot is designed so that the roboRIO is buried, you can use this handy cord to deploy and debug code. 

This Heat Shrink Assortment kit is perfect for outfitting your shop with a comprehensive selection of shrink tube. It contains many lengths and gauges to be used.

A 120 Amp Circuit breaker legal for FIRST Robotics Competition robots.

Used in many educational and competition robotics as a safety mechanism for over current.

Of course, we highly recommend using circuit breakers on each channel downstream, rated appropriately for each component to protect your motors, speed controllers, and control system components. 

The waterproof housing is meant to be surface mounted on a rigid element of a robot.

Per R609 of the 2022 First Robotics Competition Manual this breaker, CB285-120 is legal for use in the First Robotics Competition.
We have two FRC legal options, if this one is out of stock, please see am-0282

Specifications

• Manufacturer: Cooper Bussman
• Manufacturer Part #: CB285-120
• Size: 2.9 x 1.9 x 1.5 in.
• Style: Manual Reset
• Thread: M6
• Voltage: 48V DC
• Weight: 0.24 lbs

Documents

Designed to join together two CAN devices in series. This makes it easy to break the connection to remove robot mechanisms or to help extend the length of your connection.

This is a quick and reliable compact connector for flexible conductors. Splicing has never been easier. Lift the orange lever, and insert the conductor, close the lever. The lever clicks as it is lowered, actuating the CAGE CLAMP®, for superior connectivity. This tool-free connection and disconnection makes the connection simple to create and alter in the future.

This power connector to the NI 4 Slot cRIO and roboRIO has a push-in spring connector that is easy to use. This can be use in place of the roboRIO Power Sauro Connector CTF020V8.

This is the SB connector side of the custom length robot power cable kit, and is offered as an option to those that are looking to customize further and do not want the ring terminal ends to be the same overall distance from the SB connector, or need a replacement cable.

All wire connections are crimped with a 6-ton pneumatic crimping tool to ensure they are never the failure point.

How to Customize:

1. Select your Cable Gauge and Type
2. Select the overall cable length, which does not included the SB connector
3. Select the length of the Red Wire side, which is typically the length between the SB connector and the 120A Breaker

Note: Lengths are +/- 0.5 in.

Wires Only

This encoder is a magnetic rotary encoder that communicates over a robots' CAN bus. This encoder supports CAN 2.0 and provides the same position, velocity, and resolution as you would expect from the SRX Mag encoder.

For Cross The Road Electronics warranty replacements or assistance with CTRE products, please contact Cross The Road Electronics. Email: [email protected]

Specifications

• Current: 60 mA Max, Less than 50 mA Nominal
• Gauge: Minimum Recommended 22 AWG
• Voltage: 6-16V DC

This 12V flexible color-changing LED strip is perfect for robot lighting whether it's for fun or feedback. When used with an RGB controller such as the roboRIO (sold separately) one can control the color output including solid colors (red, green, blue, etc.) gradient fading, and blinking. Each LED is individually addressable, allowing for the display of multiple colors simultaneously. This light strip features a signal break-point continuous transmission, meaning that when one LED gets damaged, the others will keep working. It accepts 5V or 6V data input and is compatible with our 4pin LED Connector.

NOTE: This strip's color pattern is actually GRB, rather than RGB. When controlling it, you may have to flip the values of red and green to produce the desired color.

This is a solderless, clamping connector is intended to be used with our 12V Addressable LED Light Strip. To use, simply cut off some of the clear insulation on the LED strip to reveal the gold contacts, insert into the connector, and pinch to close. The connector will pierce each contact, providing a robust and long lasting connection. The wires on the other side can be swapped around by prying up that side of the connector and simply sliding out each wire and sliding them back in to the desired channels. That way you can keep your power & ground colors consistent and remove the redundant data line if you choose not to use it!

This chain is designed to hold wires in check while attached to a moving object. They are particularly useful for controlling a manipulator on the end of an arm or elevator. 

This chain is designed to hold wires in check while attached to a moving object. They are particularly useful for controlling a manipulator on the end of an arm or elevator. 

Options:

• Mounting brackets
  • Sold in qty 2
  • 4 mounting holes, 0.13 in. countersunk
  • One piece easy install

This version of the SPARK MAX CAN Cable bridges the H and L signals together. By doing this within the cable itself, the CAN Bus is less likely to break in disconnection from the SPARK MAX Motor Controller. One end is the JST-PH 4-pin connector, with the other splitting to one male and one female 0.1 in. 3-pin PWN. The CAN High is on the yellow wire and the CAN Low is on the green wire.

6 AWG Flex EPDM Jacket with SB50

Overall Length of Cable - 36 Inches

Length Between SB Connector and 120A Breaker - 29 Inches