Trier par
Positionner
Nom: A à Z
Nom: Z à A
Prix ??croissant
Prix: décroissant
Créé sur
Affichage
16
32
64
par page
# am-2631
$23,06
$23,29
(En stock)
This gear fits on the PG27, PG71, and PG188 10mm output shaft. It is used in the AM Turret.
Specifications:
Number of teeth: 32
Diametral pitch: 20
Pitch diameter: 1.6 inch
Pressure angle: 14.5 degrees
Face width: 0.4 inch
Overall width: 0.4 inch
Bore: 10mm (0.395 inch) diameter hole w/ 4mm (0.158 inch) keyway
Material: 4140 steel, cold formed into gear teeth
Weight: 0.2 lbs.
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3618
$9,22
$9,32
(
35 En stock)
This is a 18 tooth sprocket with a 0.5 in. keyed bore.
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3013
$43,05
$43,48
(En stock)
This 40 tooth aluminum gear is pivotal in steering the Swerve & Steer module.
It mates with a 48 tooth gear which is driven from the PG71 gear-motor. The
surface of this aluminum gear is treated with a very durable hard coat
anodization to allow for wear. This gear receives a fairly low torque, and
therefore aluminum is a good, lightweight material for it's use.
Specifications:
Material: 6061 Aluminum with hard coat anodizing
Diametral pitch: 20
Pressure angle: 14.5 degrees
Number of teeth: 40
Pitch diameter: 2.00 inch
Bore: 0.500 inch
Gear Face Width: 0.400 inch
Thickness: 1.13 inch
Weight: 0.11 pound
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3620
$10,76
$10,87
(En stock)
This is a 24 tooth sprocket with a 0.5 in. keyed bore.
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3104_pinion
$6,15
$6,21
(En stock)
This gear comes standard as the pinion for the NeveRest motor, am-3104
Specifications:
Module: 0.5
Tooth Count: 12
Pressure Angle: 20 Degrees
Helix Angle: 18 Degrees, Left
Bore: 2.98mm
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-0647
$22,00
$15,53
(En stock)
This is the aluminum shaft plate Toughbox Mini.
Specifications:
Material: 5052 aluminum
Thickness: 1/8 inch
Weight: 0.3 pound
Size: 5 inch x 4.875 inch x 1 inch
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3328
$26,14
$26,40
(En stock)
Overview:
This 35 Tooth Dog Gear features a bearing bore suited to press fit a 1.125" diameter bearing, allowing this gear to serve as an output gear on a 0.500" shaft, as featured in our Rocketbox PTO.
Specifications:
Material: 4140 Steel
Diametral pitch: 20
Pressure angle: 14.5
Number of teeth: 35
Pitch Diameter: 1.75 inch
Bore: 1.1249" - 1.1241"
Thickness: 0.425"
Weight: 0.154
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-0918
$10,76
$10,87
(En stock)
Sheet Aluminum Plate for back side of the Work Gearbox.
Specifications:
Width: 3.625" (4.563" at tabs)
Height: 4.75"
Depth: 1.463" at L
Material: 6061 Aluminum (.0875" thick)
Weight: 0.16 Lb
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3627
$9,22
$9,32
(
2 En stock)
Specifications:
Bore: 0.375 in. Hex
Series: #25
Weight: 0.034 Pounds
Material: 7075-T6 Aluminum
Thickness: 0.1 in.
Tooth Count: 18
Hub Diameter: 0.873 in.
Overall Depth: 0.4 in.
Pitch Diameter: 1.440 in.
Outside Diameter: 1.568 in.
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3482
$13,84
$13,98
(
16 En stock)
This gear is used as the input pinion gear for the EVO Shifter. This gear is a tight press fit onto a CIM gear, and requires at minimum a 3-ton arbor press to install. If a CIM motor with this gear pre-installed interests you, check out am-0255_15T.
Specifications:
Tooth Count: 15
Diametral Pitch: 32
Pressure Angle: 20
Pitch Diameter: 0.469"
Face Width: 0.531"
Thickness: 0.75"
Material: 1117 Steel
Bore: 0.312" Round (7.92mm) This is a press fit onto the CIM Motor (am-0255)
Weight: 0.019 Lbs
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-0919a
$10,76
$10,87
(En stock)
Sheet Aluminum Plate for output side of the Work Gearbox.
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3630
$9,22
$9,32
(En stock)
Specifications:
Bore: 0.375 in. Hex
Series: #25
Weight: 0.06
Material: 7075-T6 Aluminum
Thickness: 0.1 in.
Tooth Count: 24
Hub Diameter: 1.123 in.
Overall Depth: 0.4 in.
Pitch Diameter: 1.91 in.
Outside Diameter: 2.049 in.
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3484
$18,45
$18,64
(En stock)
Specifications:
Tooth Count: 14
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 0.7
Face Width: 0.375"
Material: 4140 Steel
Bore: 0.375" Hex
Weight: 0.029 Lbs
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-0920
$19,11
$18,64
(En stock)
End Plate for the Worm Gearbox.
Specifications:
Weight: 0.08 pounds
Width: 1.28"
Height: 4.57"
Depth: 0.25"
Material: Clear Polycarbonite
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3632
$8,46
$8,55
(
4 En stock)
This is a 18 tooth sprocket with a 10mm DD bore.
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS
# am-3485
$19,99
$20,19
(En stock)
Specifications:
Tooth Count: 24
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.2"
Face Width: 0.375"
Material: 4140 Steel
Bore: 0.375" Hex
Weight: 0.1 Lbs
Ajouter à la liste comparative
Ajouter à la liste de souhaits
Ajouter au panier
DEVIS