The 6mm diameter D -Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

Specifcation:

• Stainless Steel
• 432mm length
• 6mm OD
• 5.5mm to flat
• Step File

 

The 6mm diameter D -Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

Specifcation:

• Stainless Steel
• 70mm length
• 6mm OD
• 5.5mm to flat
• Step File

 

The 6mm diameter D -Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

 

Specifcation:

 

• Stainless Steel
• 96mm length
• 6mm OD
• 5.5mm to flat
• Step File

 

Ideal for the myRIO.

• Inside Contact Diameter: 2.1mm
• Outside Contact Diameter: 5.5mm
• Termination Style: Solder Cup
• Voltage Rating: 12 V
• 6 Amp
• 1 meter cord length
• 18AWG or 20AWG wire guage
• DC connector type

 

• Inside Contact Diameter: 2.1mm
• Outside Contact Diameter: 5.5mm
• Termination Style: Solder Cup
• Voltage Rating: 12 V
• 6 Amp
• 1 meter cord length
• 18AWG wire guage
• DC connector type

 

49mm x 87mm sign used with 127mm high sign holder.

The D-Shaft Collar is 6mm ID and 12mm OD. The inside diameter will fit any of the D-Shaft axels.

Specifcations:

• Material: 6061-T6 Aluminum

• Step File

Use the Dupont Single Pin - 4 wire - female to female cable with the Ultrasonic Distance Sensor

 

Specifications: 

• Dupont Single Pin
• 4 wire
• female to female cable
• Length: 50cm
• Gauge: 22AWG

The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

• Material: 6061-T6 Aluminum
• Step File

 

Includes,

• 2 - 336mm U-Channel  76012
• 1 - 288mm U-Channel (2 pack)  76013-2
• 2 - 144mm U-Channel (2 pack) 76016-2
• 2 - 96mm U-Channel (2 pack)  76017-2
• 2 - 48mm U-Channel (2 pack)  76018-2
• 2 - 336mm x 40mm Flat Bracket  76060
• 1 - 288mm x 40mm Flat Bracket (2 pack)  76061-2
• 1- 192mm x 40mm Flat Bracket  76063-2
• 1 - 144mm x 40mm Flat Bracket  76064-2
• 1 - 96mm x 40mm Flat Bracket  76065-2
• 1 - 192mm x 96mm Flat Bracket (2 pack)  76066-2
• 3 - L Bracket (2 pack)  76087-2
• 3 - Inside L Bracket (2 pack)  76089-2
• 1 - 6mm x 96mm D-Shaft (6 pack)  76161-6
• 2 - Collar 6mm ID D-Shaft, 12mm OD (6 pack)  76304-6
• 1 - Bushing Bronze 6mm ID x 8mm OD (12 Pack) 76300-12
• 1 - Bushing Bronze 6mm ID x 14mm OD (12 Pack) 76301-12
• 1 - Flange Bearing  6mm ID, 14mm OD, 15mm Flange (12 Pack) 76302
• 1 - Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (24 pack)  76305-24
• 1 - Shaft Spacer Plastic 6mm ID x 10mm OD x 2mm L (24 pack)  76306-24
• 2 - 6mm Shaft Hub (4 pack)  76284-4
• 2 - 32 Tooth Gear (2 pack)  76220-2
• 1 - 64 Tooth Gear (2 pack)  76221-2
• 2 - 128 Tooth Gear  76222
• 1 - Rack & Pinion (2 pack)  76170-1
• 1 - Multi-Mode Smart Servo  75002
• 1 - M3 x 8mm Socket Head Cap Screw (pack of 100)  76200-100
• 1 - M3 x 10mm Socket Head Cap Screw (pack of 100)  76201-100
• 1 - M3 x 12mm Socket Head Cap Screw (pack of 100)  76202-100
• 1 - M3 x 10mm Button Head Cap Screw (pack of 50)  76203-50
• 1 - M3 Kep Nut (pack of 100)  76204-100
• 1 - 25mm Standoff (12 pack)  76182-12
• 1 - 48mm Standoff (12 pack)  76181-12

F6's unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (velcro, tape, etc.) The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices. F6 will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses.

Includes,

• 2 - M3 x 8mm Socket Head Cap Screw (pack of 100)  76200-100
• 2 - M3 x 10mm Socket Head Cap Screw (pack of 100)  76201-100
• 2 - M3 x 12mm Socket Head Cap Screw (pack of 100)  76202-100
• 2 - M3 x 10mm Button Head Cap Screw (pack of 50)  76203-50
• 3 - M3 Kep Nut (pack of 100)  76204-100
• 2 - M3 Nyloc Nut (pack of 100)  76205-100
• 1 - M3 x 30mm Socket Head Cap Screw (pack of 50)  76206-50
• 1 - M3 x 20mm Socket Head Cap Screw (pack of 50)  76209-50
• 1 - 2.5mm Hex Ball End Screwdriver  70142
• 1 - Combination Wrench 5.5mm  70145

The Flange Bearing 14mm OD fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the D-Shaft axels.

• Quantity: 1 or 12
• Material: AISI440C stainless steel
• Sealed Type: ZZ metal shields
• Precision: ABEC-3
• Clearance: C0
• Lubrication:Kyodo SRL Grease
• ID (inner diameter)/Bore:6 mm
• OD (outer diameter): 14 mm
• OD of Flanged Size: 15 mm
• Width: 5 mm
• Thickness of Flange: 1 mm
• Step File

Includes,

• 2 - 432mm x 40mm Flat Bracket  76058
• 2 - 384mm x 40mm Flat Bracket  76059
• 2 - 336mm x 40mm Flat Bracket  76060
• 1 - 288mm x 40mm Flat Bracket  76061-2
• 2 - 240mm x 40mm Flat Bracket  76062
• 1 - 192mm x 40mm Flat Bracket  76063-2
• 1 - 144mm x 40mm Flat Bracket  76064-2
• 1 - 96mm x 40mm Flat Bracket  76065-2
• 1 - 192mm x 96mm Flat Bracket (2 pack)  76066-2

Includes,

• 3 - 32 Tooth Gear (2 pack)  76220-2
• 3 - 64 Tooth Gear (2 pack)  76221-2
• 2 - 128 Tooth Gear  76222
• 4 - 6mm Shaft Hub (4 pack)  76284-4
• 1 - M3 x 12mm Socket Head Cap Screw (pack of 100)  76202-100

This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.

Specifications:

• type: GT2 open-loop
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile