Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    New Products

    Voir comme Grille Lister
    Trier par
    Affichage par page

    3D Depth Camera

    #71044
    $262,54
    (En stock)

    Designed as a more affordable replacement for the RealSense D435, the Studica 3D Depth Camera provides an accurate high-definition depth-sensing camera for mobile robotics and consumer electronic projects.

    Intake Hub Kit

    #70210
    $11,10
    ( 1550 En stock)

    The Intake Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Used with the Silicone Rubber Tubing #76410


    Specifications:

    • Main piece
      • hex width: 20.78mm*10.0mm thick
      • 6*M6 tapped holes
      • 1*M4 tappped hole for M4 set screw
      • 6.0mm Diameter D Hole
      • Material AL6061-T6
      • Φ7.5mm*14.0mm
    • Pins
      • 6PCS in a pack
      • M6*4.0mm thread
      • Material SS303
    • Step file

    Studica Robotics Classroom Kit

    #70405
    Demander un devis
    (En stock)

    From Competition to Classroom, the Studica Robotics Classroom Kit is ideal for classroom Robotics programs.  This kit will allow for instruction on Robotics Design, CAD, Prototyping, Building, and Programming.  Reach more students with important Curriculum Correlations to Coding, Manufacturing, Tech Design, and Engineering while teaching robotics in the classroom with the Studica Robotics Classroom Kit.

     

    Download the Kit List here.

    Linear Slide Rail, 288mm Length, 180mm Stroke

    #72066
    $19,25 $20,82
    ( 313 En stock)

    The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 288m, with a 180mm stroke, creating a 470mm extended length. 

     

    IN STOCK

     

    • Width: 24mm
    • Height: 7.2mm
    • Length: 288mm
    • Stroke: 180mm
    • Extendended length: 468mm
    • Step file

    Linear Slide Rail, 384mm Length, 240mm Stroke

    #72067
    $21,95 $24,99
    ( 280 En stock)

    The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 384m, with a 240mm stroke, creating a 530mm extended length. 

     

    IN STOCK

     

    • Width: 24mm
    • Height: 7.2mm
    • Length: 384mm
    • Stroke: 240mm
    • Extendended length: 530mm
    • Material: 6061 Aluminum
    • Step file

    Linear Servo RC Actuator 50S-95N

    #75010
    $90,28
    ( 1 En stock)

    The Studica Linear Servo RC Actuator 50S-95N is a new Servo motor which has a stroke of 50mm and a max force of 95N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Linear Servo RC Actuator 50S-190N

    #75011
    $90,28
    ( 250 En stock)

    The Studica Linear Servo RC Actuator 50S-190N is a new Servo motor which has a stroke of 50mm and a max force of 190N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Linear Servo RC Actuator 140S-95N

    #75013
    $97,22
    ( 10 En stock)

    The Studica Linear Servo RC Actuator 140S-95N is a new Servo motor which has a stroke of 140mm and a max force of 95N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Linear Servo RC Actuator 140S-190N

    #75014
    $97,22
    ( 250 En stock)

    The Studica Linear Servo RC Actuator 140S-190N is a new Servo motor which has a stroke of 140mm and a max force of 190N. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Servo Arm Extended

    #76150
    $8,32
    (En stock)

    The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

     

    Specifcations:

    • Spline: 25 Tooth, 3.8mm deep
    • Length: 56mm
    • Width: 14mm
    • Height: 7.8mm
    • Material: 6061-T6 Aluminum
    • Step File

    Servo Arm

    #76151
    $7,63
    (En stock)

    The Studica Servo Arm can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

     

    Specifcations:

    • Spline: 25 Tooth, 3.8mm deep
    • Length: 33mm
    • Width: 14mm
    • Height: 7.8mm
    • Material: 6061-T6 Aluminum
    • Step File

    Servo Hub Pro

    #76152
    $7,63
    (En stock)

    The Studica Servo Hub Pro can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

     

    Specifcations:

    • Spline: 25 Tooth, 3.8mm deep
    • Height: 9mm
    • OD: 30mm
    • Material: 6061-T6 Aluminum
    • Step File

    Servo Spline Gear (25 Tooth Spline, 30 Tooth)

    #76153
    $13,88
    ( 962 En stock)

    The Studica 30T Servo 25T Spline Gear is used with the Studica Multi-Mode Smart Servo or Studica Multi-Mode Smart Servo 200.

     

    Specifications:

    • Material: Steel Hardened, Zinc plated
    • Step File

    M3 x 10mm Low Profile Screw with Kep Nut (6 pack)

    #76199-6
    $4,15
    ( 2448 En stock)

    The M3 x 10mm Low Profile Screw with Kep Nut is a 304 Stainless Steel m3 Din 7991 Countersunk Hex Socket Flat Head Screw with a matching Kep Nut. This package is made for the Slide Rail, 288mm Length, 180mm Stroke and the Slide Rail, 384mm Length, 240mm Stroke

    Includes,

    • 6 - M3 x 10mm Low Profile Screw
    • 6 - Kep nut

    100mm Slim Mecanum Wheel Set (Bearing Rollers, 2 left, 2 right)

    #76246
    $189,00 $193,08
    ( 313 En stock)

    The 100mm Slim Mecanum Wheel Set comes with 2 left and 2 right, and steel ball bearings. With blue steel frame and black rollers.  The wheel is comprised of 12 black rollers and is able to move in any direction. Rollers are set at 45° to the axis of rotation of the wheel.  

     

    Rollers are mounted with steel ball bearings, making the roll more fluent.

     

     Wheel Specifications: 

    • Diameter:                                                100mm
    • Width:                                                     38m
    • Number of Rollers:                                 12  
    • Number of Plates for each wheel:          2
    • Body material:                                        Steel
    • Roller material:                                       Polyethylene (PE) and Polypropylene (PP)
    • Spacer Material:                                     Delrin              

    38mm Omni Wheel

    #76259
    $11,25
    ( 2096 En stock)

    The 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.

     

     

    Specifications:

    • Diameter: 38mm
    • Number of rollers: 8
    • Body Material: Delrin
    • Roller Material: TPE/TPU 80A
    • Max Load: 2kg
    • Weight:
       

    Includes,

    • 38mm Omni wheel
    • 38mm 6mm D-Shaft Hub, pre-installed
    • 38mm 5mm Hex Shaft Hub
    • 38mm 7mm Hex Shaft

    38mm Omni Wheel (3 pack)

    #76259-3
    $31,50

    The 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.

     

    Specifications:

    • Diameter: 38mm
    • Number of rollers: 8
    • Body Material: Delrin
    • Roller Material: TPE/TPU 80A
    • Max Load: 2kg
    • Weight:
       

    Includes,

    • 38mm Omni wheel
    • 38mm 6mm D-Shaft Hub, pre-installed
    • 38mm 5mm Hex Shaft Hub
    • 38mm 7mm Hex Shaft

    Light Weight Shaft Hub

    #76282-2
    $11,10
    ( 3047 En stock)

    The Studica Light Weight Shaft Hub is used with the 6mm D shafts. It has a 5mm set screw for tight clamping and seven M3 tapped mounting holes.

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm D Shaft ID
    • M3 tapped hole pattern for connecting to structure
    • Step File

    Enhanced Wheel Hub Kit

    #76291
    $9,95 $20,82
    ( 1245 En stock)

    Used with Studica Omni and Mecanum wheels for a strong axel hold.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Color: Blue
    • Step File

    6mm D Shaft Low Profile Clamping Hub

    #76292
    $8,32
    ( 1573 En stock)

     

     

    Φ29.0mm*16.0mm thick
    6*M3 thread tapping through
    (including 2*M3 thread for M3 SHCS)
    Φ6.0mm D hole
    AL6061-T6

    6mm D Shaft Collar Clamp 2 Piece

    #76293
    $5,54
    ( 892 En stock)

    PRE-ORDER Only shipping January 2023

     

    Φ20.0mm*8.0mm thick
    2*M3 thread for M3 SHCS
    on the clamp side
    Φ6.0mm D hole
    AL6061-T6

    3mm Pattern Spacer (10 pack)

    #76294-10
    $6,93

    ODΦ20.0mm*ID14.0mm
    *3.0mm thick
    8*Φ3.50mm holes
    10pcs per pack
    Delrin
    Blue

    Face Bearing Block

    #76299
    $13,88
    ( 387 En stock)

    The Studica Face Bearing Block can be mounted on any  Studica channel and bracket providing which will allow for a 6mm ID through hole for 6mm shafts (axles). It has a permanently installed Standard Sealed Bearing. Has 8 x M3 tapped through holes for easy mounting.

    Small Thrust Ball Bearing 6mm ID, 12mm OD (12 pack)

    #76325-12
    $27,77
    ( 742 En stock)

    The Small Thrust Ball Bearing is used for vertical and axial loads to withstand heavy loads. These ball bearings have track grooves on the upper and lower track boards to reduce friction. Use these with structure for any hole where an axial load will be applied.

    Specifications:

    • Inner Diameter - 6mm
    • Outer Diameter - 12mm
    • Height - 4.5mm
    • Material: Chrome Steel GCr15

    30 Tooth Gear

    #76500
    $13,88
    (En stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 12mm
    • Step File

    90 Tooth Gear

    #76501
    $18,04
    (En stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 6mm
    • Step File

    Threaded Joiner Plate (6 pack)

    #76502-6
    $18,04
    (En stock)

    The Studica Threaded Joiner Plate can be used to join two different structure components together, such as U Channel and brackets.

     

    Specifications:

    • Length: 24mm
    • Width: 22mm
    • Height: 3mm
    • Holes: 10 x M3 x 3mm Tap Through
    • Material: 6061-T6 Aluminum, Blue Anodized
    • Step File

    Threaded Pattern Plate (6 pack)

    #76503-6
    $18,04
    (En stock)

    The Studica Threaded Pattern Plate can be used to join two different structure components together.

     

    Specifications:

    • OD: 28mm
    • ID: 14mm
    • Thickness: 3mm
    • Holes: 8 x M3 x 3mm Tap Through
    • Material: 6061-T6 Aluminum, Blue Anodized
    • Step File

    Rubber Grommet (10 pack)

    #76504-10
    $8,32
    (En stock)

    Rubber Grommets are made for the Studica channel and plates and or any structure with a 14mm hole. Use it for protecting wire or as a bumper.

    Specifications:

    • Outside diameter: 18mm
    • Inside Diameter : 11mm
    • Hole fitting diameter: 14mm
    • Thickness: 9mm
    • Step File

    U-Channel Bumper (4 pack)

    #76505-4
    $9,71
    (En stock)

    The Studica U-Channel Bumper is connected to the end of the Studica 48mm U-Channel and helps remove sharp corners that can cause damage when the robot is bumping into other objects. It also creates an ecstatically clean finish to your robot.

    Specifications:

    Rubber Foot (4 pack)

    #76506-4
    $7,63
    (En stock)

    Made of Nylon, the Studica Rubber Foot is used with the Studica Robotics building structure and for many other uses.

    Servo Extension Cable

    #70188
    $6,93
    ( 2798 En stock)

    ·      450mm Length

    ·      3 position

    ·      TJC8 MH-FC on one end

    ·      TJC8 FH-MC on the other end

    ·      Twisted cable

    ·      Colors: White, Red, Black (red in middle)

    ·      24AWG Guage

    Servo Y-Split Cable

    #70189
    $8,32
    ( 1949 En stock)
    • 150mm Length
    • 3 Position
    • TJC8 FH-MC on 2 Split Ends
    • TJC8 MH-FC on single end
    • Twisted Cable
    • Colors: White, Red, Black (red in middle)
    • 24AWG Guage

    Cypher MAX Through Bore Encoder

    #75051
    $69,00
    (En stock)

    This versatile rotary sensor offers a comprehensive solution for measuring both relative and absolute positions, thanks to its ABI quadrature output and absolute position pulse output capabilities. The encoder is thoughtfully designed with a standard 3/8-inch Hex Through Bore, complete with strategically placed mounting holes to seamlessly integrate into various multi-channel systems. Enhancing its adaptability further, the package includes interchangeable inserts, allowing you to effortlessly convert the 3/8-inch hex to a 6mm D-Shaft, 5mm hex, or 7mm hex, providing you with exceptional flexibility for your application needs.

     

    Great for use in an FTC Odometry system along with our 38mm omni wheel.