Robotique
Robotique
#25 18 Tooth 0.375 inch Hex Sprocket
#am-3627
$9,22
$9,32
(
2 En stock)
Specifications:
- Bore: 0.375 in. Hex
- Series: #25
- Weight: 0.034 Pounds
- Material: 7075-T6 Aluminum
- Thickness: 0.1 in.
- Tooth Count: 18
- Hub Diameter: 0.873 in.
- Overall Depth: 0.4 in.
- Pitch Diameter: 1.440 in.
- Outside Diameter: 1.568 in.
15T 32DP 0.312 Bore Steel Gear
#am-3482
$13,84
$13,98
(
16 En stock)
This gear is used as the input pinion gear for the EVO Shifter. This gear is a tight press fit onto a CIM gear, and requires at minimum a 3-ton arbor press to install. If a CIM motor with this gear pre-installed interests you, check out am-0255_15T.
Specifications:
- Tooth Count: 15
- Diametral Pitch: 32
- Pressure Angle: 20
- Pitch Diameter: 0.469"
- Face Width: 0.531"
- Thickness: 0.75"
- Material: 1117 Steel
- Bore: 0.312" Round (7.92mm) This is a press fit onto the CIM Motor (am-0255)
- Weight: 0.019 Lbs
Output Plate for Worm Gearbox (am-0919a)
#am-0919a
$10,76
$10,87
(En stock)
Sheet Aluminum Plate for output side of the Work Gearbox.
#25 24 Tooth 0.375 inch Hex Sprocket
#am-3630
$9,22
$9,32
(En stock)
Specifications:
- Bore: 0.375 in. Hex
- Series: #25
- Weight: 0.06
- Material: 7075-T6 Aluminum
- Thickness: 0.1 in.
- Tooth Count: 24
- Hub Diameter: 1.123 in.
- Overall Depth: 0.4 in.
- Pitch Diameter: 1.91 in.
- Outside Diameter: 2.049 in.
14T 20 DP 0.375" Hex Bore, Steel Gear
#am-3484
$18,45
$18,64
(En stock)
Specifications:
- Tooth Count: 14
- Diametral Pitch: 20
- Pressure Angle: 14.5
- Pitch Diameter: 0.7
- Face Width: 0.375"
- Material: 4140 Steel
- Bore: 0.375" Hex
- Weight: 0.029 Lbs
End Plate for Worm Gearbox (am-0920)
#am-0920
$19,11
$18,64
(En stock)
End Plate for the Worm Gearbox.
Specifications:
- Weight: 0.08 pounds
- Width: 1.28"
- Height: 4.57"
- Depth: 0.25"
- Material: Clear Polycarbonite
#25 18 Tooth 10 mm DD Bore Sprocket
#am-3632
$8,46
$8,55
(
4 En stock)
This is a 18 tooth sprocket with a 10mm DD bore.
24T 20 DP 0.375" Hex Bore, Steel Gear
#am-3485
$19,99
$20,19
(En stock)
Specifications:
- Tooth Count: 24
- Diametral Pitch: 20
- Pressure Angle: 14.5
- Pitch Diameter: 1.2"
- Face Width: 0.375"
- Material: 4140 Steel
- Bore: 0.375" Hex
- Weight: 0.1 Lbs
Motor Plate for Worm Gearbox (am-0921)
#am-0921
$18,45
$18,64
(En stock)
Motor mount Plate for the input motor end of the Worm Gearbox.
#25 24 Tooth 10 mm DD Bore Sprocket
#am-3635
$8,46
$8,55
(
10 En stock)
This is a 24 tooth sprocket with a 10mm DD bore.
35T 20 DP 0.5" Hex Bore, Steel Gear
#am-3486
$23,06
$23,29
(En stock)
Specifications:
- Tooth Count: 35
- Diametral Pitch: 20
- Pressure Angle: 14.5
- Pitch Diameter: 1.75"
- Face Width: 0.375"
- Material: 4140 Steel
- Bore: 0.5" Hex
- Weight: 0.146 Lbs
Motor Plate for CIM-Sim Gearbox (am-0926)
#am-0926
$12,30
$12,42
(En stock)
Sheet Aluminum Plate for the CIM-Sim Gearbox.
TB3 Motor Plate (am-0978)
#am-0978
$24,60
$24,85
(En stock)
This is the plate on the TB3 Gearbox that is on the motor side.
Specifications:
- Material: 6061 Aluminum
- Size: 5" x 5" x 1/4"
- Weight: lbs
50T 20DP 0.5" Hex Bore, Steel Gear
#am-3488
$27,68
$27,95
(En stock)
Specifications:
- Tooth Count: 50
- Diametral Pitch: 20
- Pressure Angle: 14.5
- Pitch Diameter: 2.5"
- Face Width: 0.375"
- Material: 4140 Steel
- Bore: 0.5" Hex
- Weight: 0.25 Lbs
TB3 Shaft Plate (am-0979)
#am-0979
$15,38
$15,53
(En stock)
This is the plate on the TB3 Gearbox that is on the shaft output side.
Specifications:
- Material: 6061 Aluminum
- Size: 5" x 5" x 1/8"
- Weight: lbs
32 Tooth 20 DP 4 Tooth Steel Dog Gear
#am-3489
$26,14
$26,40
(En stock)
Specifications:
- Tooth Count: 32
- Diametral Pitch: 20
- Pressure Angle: 14.5
- Pitch Diameter: 1.6"
- Face Width: 0.438"
- Material: 4140 Steel
- Dog Profile: 4 Tooth, 90 Degrees Opposed
- Bearing Bore: 1.124"
- Weight: 0.125 Lbs
Robotique
Filtrer par
Filtrer par prix
filtering.manufacturerfilter