Specifications:

• Material: 4140 steel, cold formed
• Diametral pitch: 20
• Pressure angle: 14.5
• Number of teeth: 24
• Pitch diameter: 1.2 inch
• Bore: 1/2" Hex (0.501-505 inch)
• Thickness: 0.38
• Weight: 0.086 pound

This is the upper sheet metal part for the AM14U Family Vertical Battery Mount (am-3964). It surrounds the battery and has a tab to bolt either the SB120 or SB50 robot side battery connector.

Specifications

• Height: 2.00 in.
• Length: 5.41 in.
• Material: 5052 Aluminum
• Width: 4.22 in.

Specifications:

• Material: 4140 steel, cold formed
• Diametral pitch: 20
• Pressure angle: 14.5
• Number of teeth: 35
• Pitch diameter: 1.75 inch
• Bore: 8mm (0.315 inch) with 2mm keyway
• Thickness: 0.35 inch
• Weight: 0.23 pounds

This sheet metal part forms the bottom tray that supports the weight of the battery in the AM14U Family Vertical Battery Mount Kit (am-3964). It has a tab at the bottom that prevents the battery from shifting.

Specifications

• Depth: 0.13 in.
• Height: 2.056 in.
• Length: 7.00 in.
• Material: 5052 Aluminum
• Width: 6.00 in.

This pinion gear is designed to be pressed onto motors with a 5mm output shaft such as most 700 class motors. This pinion interfaces with our PG71 and PG188 gearboxes.

Specifications:

• Number of teeth: 17
• Module: 0.6
• Pitch diameter: 10.2 mm
• Pressure angle: 20 degrees
• Bore: 0.196 inch
• Overall thickness: 0.315 inch
• Material: Steel

Specifications

• Depth: 0.13 in.
• Length: 2.50 in.
• Material: 5052 Aluminum
• Width: 0.50 in.

Servo City's patented 32 pitch Hitec metal gears are designed to attach directly to the output spline of a servo. All gears are broached directly into the metal to ensure a snug fit that will not slip. These gears are designed to fit the standard 24 tooth Hitec output spline.

Specifications:

• Number of teeth: 12
• Diametral pitch: 32
• Pitch diameter: .375
• Face width: 0.250"
• Bore: 24T Servo Spline
• Weight: 0.008

This is an 11 tooth steel gear. This gear fits onto the 9015 motor shaft so that the 9015 motor can mate with the PG27 gearbox. 

Specifications:

• Number of teeth: 11
• Module: 0.6
• Pitch Diameter: 6.6 mm
• Pressure Angle: 20
• Bore 3.17mm (0.125 inch)
• Overall Thickness: 8mm
• Overall Diameter: 0.406"
• Weight: 0.001 lbs
• Material: 1215 Steel

This gear can be used in the used in the Toughbox series gearboxes, replacing the 50 Tooth Large Output Gear. It would be paired with a 21 Tooth Small Cluster Gear, in order to increase the output speed of the Toughbox.

Standard Toughbox output reduction: 12.75:1
New Toughbox output reduction, using this gear and a 21 Tooth Small Cluster Gear: 7.31:1

Specifications:

• Material: 4140 Steel
• Diametral pitch: 20
• Pressure angle: 14.5 degrees
• Number of teeth: 43
• Pitch diameter: 2.15 inch
• Bore: 1/2" Hex (0.501-0.504 inch)
• Thickness: 0.373 inch
• Weight: 0.34 pound

Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).

Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.

Specifications:

• Material - Anodized 6061-T6 Aluminum
• Step File

This 40 tooth bevel gear is paired with a 20 tooth bevel gear (am-2621) to make the LJ Bevel Box (am-2622)

Specifications:

• Material: 4020 Steel
• Module 1.25
• Number of teeth: 40
• Pitch diameter: 50mm
• Bore: 3/8" Hex
• Weight: 0.19 pound

Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).

Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.

Specifications:

• Material - Anodized 6061-T6 Aluminum
• Step File

This 20 tooth bevel gear is paired with a 40 tooth bevel gear (am-2620) to make the LJ Bevel Box (am-2622)

Specifications:

• Material: 4020 Steel
• Module: 1.25
• Number of teeth: 20
• Pitch diameter: 25mm
• Bore: 8mm with 2mm Key
• Weight: 0.09 pound