Specifications:

• Tooth Count: 85
• Diametral Pitch: 32
• Pressure Angle: 20
• Pitch Diameter: 2.65"
• Face Width: 0.50"
• Material: 1117 Steel
• Bore: 0.375" Hex

This is to mount a pneumatic cylinder to your Shifters.

Specifications:

• Material: Aluminum
• Thickness: 0.29"
• Weight: 0.025 pounds

Specifications:

• Tooth Count: 18
• Diametral Pitch: 20
• Pressure Angle: 14.5
• Pitch Diameter: 0.9"
• Face Width: 0.375"
• Material: 4140 Steel
• Bore: 0.375" Hex

This is the Carrier Plate w/ Sun Gear for the AM Planetary gearbox. Five planet gears (not included) ride on the dowel pins pressed into this part. Referencing the picture above, those dowel pins are protruding out the bottom side of the carrier plate.

Specifications:

• Weight: 0.07 pounds
• Diameter: 1-3/8"
• Length: 15/16"
• Tooth Count: 15
• Diametral Pitch: 32
• Pressure Angle: 20 degrees
• Pin Diameter: 0.125"
• Gear Material: 1117 Steel

Specifications:

• Tooth Count: 25
• Diametral Pitch: 20
• Pressure Angle: 14.5
• Pitch Diameter: 1.25"
• Face Width: 0.5"
• Material: 4140 Steel
• Bore: 0.5" Hex

Specifications:

• Tooth Count: 30
• Diametral Pitch: 20
• Pressure Angle: 14.5
• Pitch Diameter: 1.5"
• Face Width: 0.357"
• Material: 4140 Steel
• Bore: 0.375" Hex

The Plate spacer goes on the opposite side of the RAW box from the CIM Motor. 

Specifications:

• Material: 6061 Aluminum
• Length: 3.5"
• Height: 1"
• Thickness: 0.312"
• Weight: 0.07 Pounds

This is the aluminum shaft plate for our 3 Motor Toughbox. A standard Toughbox could be converted to a 3 Motor Toughbox by using this plate and also the 3 Motor Toughbox Motor Plate.

Specifications:

• Size: 5x5x0.125 inches
• Material: 6061 Aluminum
• Weight: 0.274 pound
• Finish: Tumbled

Specifications:

• Tooth Count: 34
• Diametral Pitch: 20
• Pressure Angle: 14.5
• Pitch Diameter: 1.7"
• Face Width: 0.375":
• Material: 4140 Steel
• Bore: 0.375" Hex

This is the aluminum motor mount plate for our 3 Motor Toughbox. A standard Toughbox could be converted to a 3 Motor Toughbox by using this plate and also the 3 Motor Toughbox Shaft Plate.

Specifications:

• Size: 5x5x0.25 inches
• Material: 6061 Aluminum
• Weight: 0.528 pound
• Finish: Tumbled

Specifications:

• Tooth Count: 38
• Diametral Pitch: 20
• Pressure Angle: 14.5
• Pitch Diameter: 1.9"
• Face Width: 0.375"
• Material: 4140 Steel
• Bore: 0.375" Hex

Specifications:

• Tooth Count: 36
• Diametral Pitch: 20
• Pressure Angle: 14.5
• Pitch Diameter: 1.8"
• Face Width: 0.438"
• Material: 4140 Steel
• Dog Profile: 4 Tooth, 90 Degrees Opposed
• Bearing Bore: 1.124"

Specifications:

• Tooth Count: 46
• Diametral Pitch: 20
• Pressure Angle: 14.5
• Pitch Diameter: 2.25
• Face Width: 0.438"
• Material: 4140 Steel
• Dog Profile: 4 Tooth, 90 Degrees Opposed
• Bearing Bore: 1.124"
• Weight: 0.24 Lbs