Robot Parts | Studica Canada - Robotics, Automation Technology for Education and Industry

Sonic Gearbox Motor Plate (am-2506)

#am-2506

$30.75 $31.06

(In stock)

This is the plate on the Sonic Shifter that is on the motor side. This plate has two 1/4-20 steel threaded inserts pressed in to one end of the plate.

Four Tooth Dog Gear (am-3568)

#am-3568

$46.12 $46.59

(In stock)

The dog gear has 4 dogs on each face. This allows more material around the dog gear screw, increasing strength over previous designs. A robust 1/8" diameter shoulder screw replaces the previously used #4-40 screw. The dog gear material is AMPCOÂ® 18 Bronze. This material has similar properties to stainless steel (previously used), but has added lubricity for smooth shifting.

Wheel Conversion Plate with Nub Bore

#am-2609a

$12.50 $8.55

(In stock)

This conversion plate acts as a hub between larger motion components featuring a 1.875" bolt circle to components of a smaller mounting circle such as a NeveRest Gearmotor. The bore of this plate fits shafts that are familiar to FIRST Tech Challenge teams.

Specifications:

Material: 5052 Aluminum
Bore: 0.320" (8.1mm)
Outside Bolt Pattern: 0.204" diameter holes on a 1.875" diameter circle
Inside Bolt Patterns:
Four - 0.150" (3.8mm) diameter holes on a 0.630" (16mm) diameter circle
Four - 0.160" (4mm) diameter holes on a 0.770" (19.5mm) diameter circle
Outside Diameter: 2.125" from side to side
Thickness: 0.125"
Material: 5052 Aluminum

12T 32DP 5 mm Bore Steel Pinion Gear

#am-3657

$10.76 $10.87

(In stock)

This 12 tooth pinion gear is designed to fit onto an AndyMark RedLine Motor (am-3775) and other motors with a 5 mm output shaft to interface with spur gearboxes such as the DeCIMate (am-3745), EVO Slim for RedLine and EVO Shifter for RedLine.

Specifications:

Bore: 5mm press fit
Weight: 0.014 Pounds
Material: 1117 Steel
Overall Length: 0.755 in.
Face Width: 0.625 in.
Tooth Count: 12
Pitch Diameter: 0.375 in.
Pressure Angle: 20
Diametral Pitch: 32

Arm Joint Plate (am-2692)

#am-2692

$15.38 $15.53

(In stock)

The Plate used in the PVC Arm Joint

Specifications

Height: 3.505"
Length: 5"
Material: 6061 Aluminum
Thickness: 0.188"
Weight: 0.22 lbs

45T 32DP 20PA 0.375" Hex Bore Gear

#am-3694

$23.06 $23.29

(In stock)

Specifications:

Tooth Count: 45
Diametral Pitch: 32
Pressure Angle: 20
Pitch Diameter: 1.406"
Material: 4140 Steel
Bore: 0.375 in. Hex
Weight: 0.115 Pounds

Compression Spring, 0.50" L, 0.30" OD, 0.026" Wire, Steel Zinc Plated

#am-2777

$2.31 $2.34

(In stock)

This is a steel compression spring made from music wire. It has closed and ground flat ends, and is zinc plated.

Specifications:

Length: 0.50 inch
Outside diameter: 0.30 inch
Wire Diameter: 0.026 inch
Compressed Length: 0.13 inch
Spring Rate: 11.3 pounds/inch
Maximum Load: 4.3 pounds

20T 05" Hex Bore Miter Gear

#am-3772

$33.82 $34.17

( 22 In stock)

Miter gears are a special class of bevel gears where the shafts intersect at 90° and the gear ratio is 1:1. This miter gear has a .500" hex bore, making it perfect for interfacing with many popular products in the competition robotics marketplace.

Specifications:

Material: 1045 Steel
Module: 1.25
Tooth Count: 20
Pressure Angle: 20
Pitch Diameter: 0.980 in
Mounting Distance: 0.910 in
Hub Depth: 0.350 in
Hub Diameter: 0.870 in
Bore: 0.50 in Hex
Weight: 0.056 Pounds

20T, 8 mm Bore with 2 mm Keyway Miter Gear

#am-3776

$33.82 $34.17

(In stock)

Miter gears are a special class of bevel gears where the shafts intersect at 90° and the gear ratio is 1:1. This miter gear has a 8mm bore with a 2mm keyway, fitting perfectly on a CIM motor shaft.

Specifications:

Material: 1045 Steel
Module: 1.25
Tooth Count: 20
Pressure Angle: 20
Pitch Diameter: 0.980 in
Mounting Distance: 0.910 in
Hub Depth: 0.350 in
Hub Diameter: 0.870 in
Bore: 8 mm with 2 mm keyway
Weight: 0.078 Pounds

32 Tooth 20DP 14.5PA 0.5" Hex Bore Gear

#am-3815

$23.06 $23.29

(In stock)

Specifications:

Tooth Count: 32
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.6 in.
Face Width: 0.375 in.
Material: 4140 Steel
Bore: 0.50 in. Hex
Weight: 0.11 Pounds

36T 20 DP 14.5PA 0.5" Hex Bore Gear

#am-3816

$14.76 $23.29

( 4 In stock)

Specifications:

Tooth Count: 36
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.8 in.
Face Width: 0.375 in.
Material: 4140 Steel
Bore: 0.50 in. Hex
Weight: 0.137 Pounds

46T 20 DP 14.5PA 0.5" Hex Bore Gear

#am-3819

$26.14 $26.40

(In stock)

Specifications:

Tooth Count: 46
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 2.25 in.
Face Width: 0.375 in.
Material: 4140 Steel
Bore: 0.50 in. Hex
Weight: 0.194 Pounds

20T 20 DP 14.5 PA 0.375 in. Hex Bore Gear

#am-3820

$21.52 $21.74

(In stock)

Specifications:

Tooth Count: 20
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1 in.
Face Width: 0.375 in.
Material: 4140 Steel
Bore: 0.375 in.
Weight: 0.07 Pounds

NeveRest Motor Plate

#am-3104_plate

$3.85 $3.89

(In stock)

This motor plate fits onto the NeveRest Motor, am-3104. This plate allows a NeveRest Motor to be attached to a NeveRest gearbox.

52T 20DP 14.5 PA 0.5" Hex Bore Gear

#am-3821

$29.21 $29.51

(In stock)

Specifications:

Tooth Count: 52
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 2.6 in.
Face Width: 0.375 in.
Material: 4140 Steel
Bore: 0.50 in. Hex
Weight: 0.226 Pounds

Toughbox Micro Angled Shaft Plate (am-3228)

#am-3228

$15.38 $15.53

(In stock)

The Angled Shaft Plate is one plate option for the Toughbox Micro. This plate allows the TB Micro to be mounted to existing robot structure.