This is the 14 tooth gear in the Toughbox which has a 3/8 inch hex bore. 

Specifications:

• Number of teeth: 14
• Diametral pitch: 20
• Pressure angle: 14.5 degrees
• Pitch Diameter: 0.7 inch
• Face width: 0.575 inch
• Overall width: 0.600 inch
• Bore: 0.377 inch hex hole
• Material: 4140 steel, cold formed into gear teeth
• Weight: 0.1 lbs.

This kit is the needed hardware to attach an RS 775 motor such as our RedLine (am-3775) to a 57 Sport Gearbox.

Specifications:

• Gear Bore: 5 mm
• Gear Material: Steel

Individual Components within this Bundle:

• 1 - RS-775 Motor Pinion Gear (am-3784)
• 2 - M4 x 8 mm SHCS
• 2 - M4 Lock Washer

Specifications: 

• Material: 4140 Steel
• Diametral pitch: 20
• Pressure angle: 14.5 degrees
• Number of teeth: 17
• Pitch diameter: 0.85 inch
• Bore: 0.313 inch (8mm), with 2mm keyway
• Gear face width: 0.375 inch
• Weight: 0.04 pound

This kit is the needed hardware to attach a CIM Motor (am-0225) to a CIM Sport Gearbox.

Specifications:

• Gear Bore: 8 mm
• Gear Material: Steel
• Gear Thickness: 0.350 in.

Individual Components within this Bundle:

• 1 - 16 Tooth CIM Sport Pinion Gear (am-3785)
• 2 - 10-32 x 1.0 in. SHCS

The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

• Material: 6061-T6 Aluminum
• Step File

The Worm Gear the is connected to the Output Drive Shaft of the RAW Box. 

Specifications: 

• Material: Brass
• Gear type: Worm
• Pressure angle: 25 degrees
• Number of teeth: 40
• Bore: 1/2" Hex
• Overall thickness: 0.25"
• Weight: 0.15 pound

This spacer attaches to a side of the CIM Sport Gearbox. This spacer accounts for the difference in size between the CIM Motor and the gearbox housing, allowing the gearbox to be side mounted to a surface. The holes are sized to be counterbore for 10-32 socket head screws so the plate can be held to the gearbox with some screws and used as a spacer for other longer bolts to pass through it and thread into the side of the CIM Sport. 

Specifications:

• Width: 1.5 in.
• Height: 1.5 in.
• Thickness: 0.33 in.
• Material: Aluminum
• Weight: 0.058 Pounds

Specifications:

• Material: 4140 steel, cold formed
• Diametral pitch: 20
• Pressure angle: 14.5
• Number of teeth: 24
• Pitch diameter: 1.2 inch
• Bore: 1/2" Hex (0.501-505 inch)
• Thickness: 0.38
• Weight: 0.086 pound

This is the upper sheet metal part for the AM14U Family Vertical Battery Mount (am-3964). It surrounds the battery and has a tab to bolt either the SB120 or SB50 robot side battery connector.

Specifications

• Height: 2.00 in.
• Length: 5.41 in.
• Material: 5052 Aluminum
• Width: 4.22 in.

Specifications:

• Material: 4140 steel, cold formed
• Diametral pitch: 20
• Pressure angle: 14.5
• Number of teeth: 35
• Pitch diameter: 1.75 inch
• Bore: 8mm (0.315 inch) with 2mm keyway
• Thickness: 0.35 inch
• Weight: 0.23 pounds

This sheet metal part forms the bottom tray that supports the weight of the battery in the AM14U Family Vertical Battery Mount Kit (am-3964). It has a tab at the bottom that prevents the battery from shifting.

Specifications

• Depth: 0.13 in.
• Height: 2.056 in.
• Length: 7.00 in.
• Material: 5052 Aluminum
• Width: 6.00 in.

This pinion gear is designed to be pressed onto motors with a 5mm output shaft such as most 700 class motors. This pinion interfaces with our PG71 and PG188 gearboxes.

Specifications:

• Number of teeth: 17
• Module: 0.6
• Pitch diameter: 10.2 mm
• Pressure angle: 20 degrees
• Bore: 0.196 inch
• Overall thickness: 0.315 inch
• Material: Steel

Specifications

• Depth: 0.13 in.
• Length: 2.50 in.
• Material: 5052 Aluminum
• Width: 0.50 in.

Servo City's patented 32 pitch Hitec metal gears are designed to attach directly to the output spline of a servo. All gears are broached directly into the metal to ensure a snug fit that will not slip. These gears are designed to fit the standard 24 tooth Hitec output spline.

Specifications:

• Number of teeth: 12
• Diametral pitch: 32
• Pitch diameter: .375
• Face width: 0.250"
• Bore: 24T Servo Spline
• Weight: 0.008