This is an 11 tooth steel gear. This gear fits onto the 9015 motor shaft so that the 9015 motor can mate with the PG27 gearbox. 

Specifications:

• Number of teeth: 11
• Module: 0.6
• Pitch Diameter: 6.6 mm
• Pressure Angle: 20
• Bore 3.17mm (0.125 inch)
• Overall Thickness: 8mm
• Overall Diameter: 0.406"
• Weight: 0.001 lbs
• Material: 1215 Steel

This gear can be used in the used in the Toughbox series gearboxes, replacing the 50 Tooth Large Output Gear. It would be paired with a 21 Tooth Small Cluster Gear, in order to increase the output speed of the Toughbox.

Standard Toughbox output reduction: 12.75:1
New Toughbox output reduction, using this gear and a 21 Tooth Small Cluster Gear: 7.31:1

Specifications:

• Material: 4140 Steel
• Diametral pitch: 20
• Pressure angle: 14.5 degrees
• Number of teeth: 43
• Pitch diameter: 2.15 inch
• Bore: 1/2" Hex (0.501-0.504 inch)
• Thickness: 0.373 inch
• Weight: 0.34 pound

Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).

Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.

Specifications:

• Material - Anodized 6061-T6 Aluminum
• Step File

This 40 tooth bevel gear is paired with a 20 tooth bevel gear (am-2621) to make the LJ Bevel Box (am-2622)

Specifications:

• Material: 4020 Steel
• Module 1.25
• Number of teeth: 40
• Pitch diameter: 50mm
• Bore: 3/8" Hex
• Weight: 0.19 pound

Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).

Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.

Specifications:

• Material - Anodized 6061-T6 Aluminum
• Step File

This 20 tooth bevel gear is paired with a 40 tooth bevel gear (am-2620) to make the LJ Bevel Box (am-2622)

Specifications:

• Material: 4020 Steel
• Module: 1.25
• Number of teeth: 20
• Pitch diameter: 25mm
• Bore: 8mm with 2mm Key
• Weight: 0.09 pound

This gear fits on the PG27, PG71, and PG188 10mm output shaft. It is used in the AM Turret.

Specifications:

• Number of teeth: 32
• Diametral pitch: 20
• Pitch diameter: 1.6 inch
• Pressure angle: 14.5 degrees
• Face width: 0.4 inch
• Overall width: 0.4 inch
• Bore: 10mm (0.395 inch) diameter hole w/ 4mm (0.158 inch) keyway
• Material: 4140 steel, cold formed into gear teeth
• Weight: 0.2 lbs.

This is a 18 tooth sprocket with a 0.5 in. keyed bore.

This 40 tooth aluminum gear is pivotal in steering the Swerve & Steer module. It mates with a 48 tooth gear which is driven from the PG71 gear-motor. The surface of this aluminum gear is treated with a very durable hard coat anodization to allow for wear. This gear receives a fairly low torque, and therefore aluminum is a good, lightweight material for it's use.

Specifications:

• Material: 6061 Aluminum with hard coat anodizing
• Diametral pitch: 20
• Pressure angle: 14.5 degrees
• Number of teeth: 40
• Pitch diameter: 2.00 inch
• Bore: 0.500 inch
• Gear Face Width: 0.400 inch
• Thickness: 1.13 inch
• Weight: 0.11 pound

This gear comes standard as the pinion for the NeveRest motor, am-3104 

Specifications:

• Module: 0.5
• Tooth Count: 12
• Pressure Angle: 20 Degrees
• Helix Angle: 18 Degrees, Left
• Bore: 2.98mm

This is the aluminum shaft plate Toughbox Mini. 

Specifications:

• Material: 5052 aluminum
• Thickness: 1/8 inch
• Weight: 0.3 pound
• Size: 5 inch x 4.875 inch x 1 inch

Overview:
This 35 Tooth Dog Gear features a bearing bore suited to press fit a 1.125" diameter bearing, allowing this gear to serve as an output gear on a 0.500" shaft, as featured in our Rocketbox PTO.

Specifications:

• Material: 4140 Steel
• Diametral pitch: 20
• Pressure angle: 14.5
• Number of teeth: 35
• Pitch Diameter: 1.75 inch
• Bore: 1.1249" - 1.1241"
• Thickness: 0.425"
• Weight: 0.154

Sheet Aluminum Plate for back side of the Work Gearbox.

Specifications:

• Width: 3.625" (4.563" at tabs)
• Height: 4.75"
• Depth: 1.463" at L
• Material: 6061 Aluminum (.0875" thick)
• Weight: 0.16 Lb