AndyMark
#35 Connecting Link (Master Link)
Specifications:
#35 Half Link. Also known as #35 Offset Link.
Specifications:
This Inline Chain Tensioner for #35 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #35 Master Links and integrate this to your robot for an easy-to-use chain tension solution!
The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.
CAD File(s)
am-3914_35 35 Chain Tensioner.STEP
Layout Print(s)
#35 Roller Chain, 10 feet
Specifications:
#4 Steel Washer
Specifications:
This steel shoulder screw is used in the EVO Shifter Four Tooth Dog Gear (am-3568).
Specifications:
#4-40 x 7/8" Long with 1/2" shoulder Socket Head Cap Screw used in the Dog Gear
Specifications:
These 6-32 1.25" Hex Head Machine Screw can be used for fastening Nubs to other motion products.
Specifications:
These screws are used within the FIRST STEAMWORKS? Gear. The FIRST STEAMWORKS? Gear uses 20 screws for assembly. This screw is available in quantities of 25, giving you a few extras when assembling.
Specifications:
This is a single sheet of 1/8 inch thick polycarbonate (PC) plastic, cut to a 24x24 inch square. This single sheet of PC will be shipped with the protective covering on both sides of the plastic sheet.
Polycarbonate was invented in 1963 by Dan Fox at General Electric. GE's trade name for this plastic is LEXAN, but it also is sold under other trade names (Makrolon, Hyzod, Cyrolon).
This material is NOT plexiglas or acrylic, as we don't suggest that you use that material on a mobile robot, since acrylic will easily shatter.
Specifications:
Nylon Spacer
Specifications:
Specifications:
This 7075 T6 Aluminum shaft stock is 0.375 in. from flat to flat. This stock may be a tight fit in some of our 3/8 in. hex products.
This is the "500EX Hex Hub" the bore is a 1/2" Hex Hole. It is a slightly different version of the 500 Hex Hub. It is manufactured differently, as it is extruded. Also, there is a 1.124" diameter boss on each side of the hub flange, providing a location for 1.125" bore flat sprockets. Are you having a hard time keeping your sprocket concentric with your hub? This hub is the trick.
This is the hub featured in the 2014 and 2015 Kit of Parts Drive Chassis and fits all AndyMark wheels.
Specifications:
This collar clamp is a one-piece shaft collar with a 1/2 in. bore, 0.984 in. OD, and 0.236 in. width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, easy removability, and indefinite adjustability while commonly being used for guiding, spacing, stopping, mounting, and component alignment.
Specifications:
Sourcing the right stock for the right job can be hard sometimes. No longer is that true for 1/2 inch hex spacer stock! Offered in precisely machined 1.2 inch sections as well as one three and six foot lengths (plus or minus 0.125".) This rigid stock can be cut and used in any assembly you can think of. Gearbox design? Yup. Drive train design? Yep. Manipulator design? Yep! Why stop a spacers, you can even use it to couple 2 shafts together and transfer crazy amounts of torque or cover it in grippy material and use it as a game piece roller.