Motion
Can be used with 6mm D-Shaft Axel and 6mm shaft DC motor.
Specifcations:
Specifications:
The Small Thrust Ball Bearing is used for vertical and axial loads to withstand heavy loads. These ball bearings have track grooves on the upper and lower track boards to reduce friction. Use these with structure for any hole where an axial load will be applied.
Specifications:
The Studica Smart Robot Servo Programmer is used for programming the Studica Multi-Model Smart Servo Motor and for testing other standard Servos. Use it to program the Studica Servo to switch between continuous mode, standard mode, or any custom angular mode.
Specifications:
The 5mm Round Groove Belt is 3M long and has a 10% stretch. It is also referred to as a U Groove belt.
Includes,
The XL series belt is compatible with the 6mm, 10 tooth XL pulley.
Specifications:
The pulleys are .40” inside the flanges to allow for belts up to 3/8” in width. Two set screws using 1.5mm hex key.
PRE-ORDER Only shipping January 2023
Φ20.0mm*8.0mm thick
2*M3 thread for M3 SHCS
on the clamp side
Φ6.0mm D hole
AL6061-T6
Φ29.0mm*16.0mm thick
6*M3 thread tapping through
(including 2*M3 thread for M3 SHCS)
Φ6.0mm D hole
AL6061-T6
The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 288m, with a 180mm stroke, creating a 470mm extended length.
IN STOCK
Specifications:
Includes two 5mm Bore, 10 Tooth Aluminum Pulleys and one 1M XL Timing belt
3/8” wide, 1/5 pitch XL series belti. Constructed of Neoprene with Fiberglass cords for superior strength and wear resistance. Compatible XL series pinion pulley.
The Studica Face Bearing Block can be mounted on any Studica channel and bracket providing which will allow for a 6mm ID through hole for 6mm shafts (axles). It has a permanently installed Standard Sealed Bearing. Has 8 x M3 tapped through holes for easy mounting.
The Intake Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Used with the Silicone Rubber Tubing #76410
Specifications:
The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 384m, with a 240mm stroke, creating a 530mm extended length.
IN STOCK
GT2 Pulley
Φ22.0mm*13.0mm thick
2*M4 thread for M4 set screws
Φ6.0mm D hole
AL6061-T6
The 125mm All-Terrain Wheel Set includes two left and two right rubber wheels. They have a foam core and therefore do not require air. They grip well on smooth, hard surfaces and are perfect for travel on uneven surfaces where you may have mulch, sand, dirt, or gravel. They are designed and manufactured by Studica to work with the Studica Robotics Building platform and other building sets. The All-Terrain wheels have been tested up to 40kg (88 lbs) using all four wheels.
Specifications,
Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels
Specifcation:
The M3 x 10mm Low Profile Screw with Kep Nut is a 304 Stainless Steel m3 Din 7991 Countersunk Hex Socket Flat Head Screw with a matching Kep Nut. This package is made for the Slide Rail, 288mm Length, 180mm Stroke and the Slide Rail, 384mm Length, 240mm Stroke
Includes,
This stretchy latex rubber tubing is sized to fit through any of the M3 holes in the Studica Robotics channel, brackets, wheels, gears or other motion products.
This kit includes the tools need to cut and join a urethane belt. Recommended for the 5mm Urethane Round Belt - part # 76400
This kit includes the tools need to cut and join a urethane belt. Recommended for the 5mm Urethane Round Belt - part # 76400