AndyMark
This item can only be purchased in multiples of 10
This 1/4-20 screw is 1 in. long. This screw is thread forming which means it creates a secure connection with the parts it attaches to without the use of a nut.
Specifications:
Specifications:
Specifications:
Specifications:
Specifications:
2.5 inch long thread rolling (thread forming) screw
The Hex Washer Head has a flat washer that extends beyond the sides, providing it with a greater bearing surface than a normal hex head fastener. The washer and the Hex Head are bonded together as one piece; this offers greater protection to the mating surface than a standard hex head. The increased bearing area decreases the likeliness of crushing mating surfaces. Trilobe, or Thread Rolling, screws have a blunt tapered point that requires a pre-drilled or punched hole; eliminates chips and permits replacement with standard screw. Zinc plating, retards the corrosion rate in a normal atmosphere.
Specifications:
1/4-20 x 3" Long Socket Head Cap Screw
Specifications:
This is a steel bolt, with 1/4-20 threads on one end and a bent shaft on the
other. This fastener is used in the 2013 KOP Chassis Kit, as a mounting and belt
tensioning device for mounting the Toughbox Mini.
Specifications:
1/4-28 x 1" Hex Head Screw
Specifications:
Aluminum Rivet, 1/8" thick, 0.275" body length, 0.375" diameter head,
quantity 500
Specifications:
Aluminum Rivet, 1/8" thick, 0.400" body length, 0.375" diameter head,
quantity 500
Specifications:
This is a brass plug for a 1/8" NPT port.
Specifications:
This is a Nylon plug for a 1/8" NPT port.
Specifications
Machine Key, steel. Used in various AndyMark gearboxes
Specifications:
Machine Key, steel. Used in various AndyMark gearboxes.
Specifications: