Robotique
The Sushi Roller Intake Wheels are an excellent choice for robot intakes, internal conveyors, feeder mechanisms, or anywhere you need a durable, compact and grippy roller. These rollers are made with a robust polycarbonate hex bore hub, so no external hub is necessary - just slide them onto a hex shaft, constrain them axially and you are good to go. Available in a range of durometers for a wide variety of applications, these cute little rollers are great for getting a grip on things!
Tetrix Prime; 6 V NiMH Battery Pack is a five-cell, six-volt, 1,500 mAh rechargeable battery pack, which brings long-lasting power to Tetrix Prime; motors and electronics.
This is the Rope used in the AndyMark Climber in a Box. With a tensile strength of 2,500 lbs and a 1/8 in. thickness, this rope is perfect for an FRC elevator or winch system (or whatever else you find it to be useful for. It's a strong rope. You can do a lot with it.
160mm Channel can also be cut to custom lengths with a metal-cutting blade.
We are proud to offer AndyMark's latest and greatest 6 in. diameter Mecanum wheel. This wheel's features are a culmination of our hard work in developing the Mecanum wheel since we introduced an affordable wheel to the market in 2006. This version was previously updated in the fall of 2017, and is an improvement on our previous HD (Heavy Duty) version. It has the same heavy duty features, but with an added smoothness while rolling. We minimized the gaps between the rollers, enabling this wheel to be our "smooth rolling" (SR) Mecanum Wheel.
A wheel set is comprised of two left (am-3479La) and two right (am-3479Ra) wheels. Should you need a replacement wheel, a single left or right can also be acquired. These wheels have a weight capacity of 200 pounds per wheel.
Tetrix Prime; Battery Mount Bracket makes it easy to mount battery packs to your robotic designs. Features two heavy-duty plastic clips that are used together with a bungee band to tie down the Tetrix Prime; Battery Pack. An extra band is included.
This is a quick and reliable compact connector for flexible conductors. Splicing has never been easier. Lift the orange lever, and insert the conductor, close the lever. The lever clicks as it is lowered, actuating the CAGE CLAMP®, for superior connectivity. This tool-free connection and disconnection makes the connection simple to create and alter in the future.
288mm Channel are heavy-duty aluminum channel pieces that can be cut to custom lengths with a metal-cutting blade.
Everyone knows, Blue Nitrile Roughtop Tread is the best tread in the competitive robotics marketplace. This tread is the magic behind many top-performing robots. This tread is a ground-breaking 1.5 inches wide to fit wider profile wheels like our 1.5 inch wide XL Performance Wheels. Or, use this on your own custom wheels - now you don't have to custom-cut tread for your custom wheels!
This power connector to the NI 4 Slot cRIO and roboRIO has a push-in spring connector that is easy to use. This can be use in place of the roboRIO Power Sauro Connector CTF020V8.
This bracket was originally created to mount the many variants of the Sport Gearbox but has proved to be a very versatile mounting bracket. Any motor or gearbox with a 2-inch diameter bolt circle can be mounted in this bracket. The center hole is sized to locate the 1.5 inch outside diameter of a Blue Sport gearbox.
Tetrix Prime Beam Extension Connectors bring together two square aluminum beams end to end without adding any space between. Made of ABS plastic; requires Quick Rivets and Pegs or Thumbscrews and Wing Nuts (all sold separately).
This slider block is used in pairs in the Climber in a Box to help the box tubes slide with minimum friction. This Clamp Slider Block is sized to be placed around the outside profile of 1.5 in. Box Tube.
The 4" HD Mecanum wheel comes fully assembled and ready to go and comes in three different bore sizes.
416MM Channel is a heavy-duty aluminum channel piece that serves as the structural base for building with the TETRIX Building System. This piece can also be cut to custom lengths with a metal-cutting blade.
This is the SB connector side of the custom length robot power cable kit, and is offered as an option to those that are looking to customize further and do not want the ring terminal ends to be the same overall distance from the SB connector, or need a replacement cable.
All wire connections are crimped with a 6-ton pneumatic crimping tool to ensure they are never the failure point.
How to Customize:
Note: Lengths are +/- 0.5 in.