Tube plugs are a great way to interface 1x1 and 2x1 box tube with other surfaces. They are especially good when clearance is an issue and gussets aren't an option. To use, drill a hole in the box tube, line the threaded portion of the Tube Plug up with the hole, and insert your fastener.

The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 3 in. and 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.

Light and strong, the TETRIX Tubes can be used as long extensions. Made of heavy-duty aluminum, they come in three different sizes but can also be cut to custom lengths with a metal-cutting blade.

The TETRIX PRIME Class Pack serves 12 teams of two students, offering each pair of students their own Tetrix Prime; R/C Starter Set to work with. Using the sets and the instructions from the included builder’s guide, students work collaboratively to engineer fully functioning, remote-controlled robots.

Includes:

• 12 Tetrix Prime; R/C Starter Sets each containing:
  • 298 building elements plus Gripper Kit
  • Gamepad-style, four-channel wireless controller
  • 4 servo motors (2 standard and 2 continuous rotation)
  • Rechargeable battery pack and charger
  • On/off switch and assembly tools
  • Printed setup and builder’s guides along with activity accessories

Tube plugs are a great way to interface 1x1 and 2x1 box tube with other surfaces. They are especially good when clearance is an issue and gussets aren't an option. To use, drill a hole in the box tube, line the threaded portion of the Tube Plug up with the hole, and insert your fastener. 

We are pleased to offer these new gussets that are suitable for 1" based building systems. These thoughtfully designed gussets are made from 1/8" thick 6061-T6 aluminum, which is a much stronger material than other 0.09" 5052 gussets. All of these framing gussets feature a 1" linear hole pattern, with holes suitable for either #10 screws or 3/16" rivets.

On all of the angle gussets, a generous radius was used on the inside corner for maximum strength. The various angle gussets, along with the quad and tee gusset are used together to create structures and sub-assemblies for your robot. Our bearing and Sport gussets are perfect building blocks to create a massive variety of mechanisms and assemblies to suit your needs.

Specifications

• Hole Pattern: Plates feature 0.20 in. Holes on a 1 in. Center to Center Spacing
• Material: 6061-T6 Aluminum
• Thickness: 0.125 in

Documents

Layout Print(s)

am-3860 90 Gusset REV2.PDF

am-4158 1IN Tee Gusset.PDF

am-4159 1IN Quad Gusset.PDF

am-4160 1IN 30deg Gusset.PDF

am-4161 1in 45deg Gusset.PDF

am-4162 1in 60deg Gusset.PDF

am-4163 1in 120deg Gusset.PDF

am-4164 1in 135deg Gusset.PDF

am-4165 1in 150deg Gusset.PDF

am-4166 1IN Sport Double Bearing Mount.PDF

am-4167 1IN 57Sport Side Mount Gusset.PDF

am-4168 1IN Bearing Side Mount Gusset.PDF

CAD File(s)

am-3860 90 Gusset REV2.STEP

am-4158 1IN Tee Gusset.STEP

am-4159 1IN Quad Gusset.STEP

am-4160 1IN 30deg Gusset.STEP

am-4161 1in 45deg Gusset.STEP

am-4162 1in 60deg Gusset.STEP

am-4163 1in 120deg Gusset.STEP

am-4164 1in 135deg Gusset.STEP

am-4165 1in 150deg Gusset.STEP

am-4166 1IN Sport Double Bearing Mount.STEP

am-4167 1IN 57Sport Side Mount Gusset.STEP

am-4168 1IN Bearing Side Mount Gusset.STEP

This version of the SPARK MAX CAN Cable bridges the H and L signals together. By doing this within the cable itself, the CAN Bus is less likely to break in disconnection from the SPARK MAX Motor Controller. One end is the JST-PH 4-pin connector, with the other splitting to one male and one female 0.1 in. 3-pin PWN. The CAN High is on the yellow wire and the CAN Low is on the green wire.

The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 3 in. and 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.

TETRIX MAX Tube Clamps are used to bolt TETRIX Tubes to structural elements. They feature heavy-duty aluminum construction.

• Quantity: pkg of 2
• Material: 7005 Aluminum

These versatile aluminum linkages make it easy to create custom links and pivoting connection points. The flat linkages are also great structures for building and can be cut and shaped into various angles or curves with ease for customized applications.

6 AWG Flex EPDM Jacket with SB50

Overall Length of Cable - 36 Inches

Length Between SB Connector and 120A Breaker - 29 Inches

The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 3 in. and 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.

TETRIX MAX Motor Shaft Hubs attaches wheels and gears to motor shafts. Each hub comes with a screw and is made of heavy-duty aluminum.

• Quantity: pkg of 2
• Size: 6 mm
• Material: 7005 Aluminum
• Note: Includes 10-32 set screw

These versatile aluminum linkages make it easy to create custom links and pivoting connection points. The flat linkages are also great structures for building and can be cut and shaped into various angles or curves with ease for customized applications.

These plates are included in the 2024 KitBot. Made from 0.125 in. Aluminum, these Plates are used for various structures throughout the KitBot.

Quantity of each plate included in the 2024 KitBot:

• 2 - Top Corner Bracket (am-5294)
• 2 - Tube Mounting Plate (am-5296)
• 1 - Motor Mount Plate (am-5295)

Specifications

• Material: Aluminum
• Thickness: 0.125 in.

This Pressure Sensor outputs an analog voltage that is proportional to the measured pressure. It can be plugged directly into the roboRIO and can measure up to 200 PSI. 

Specifications

• Current Draw: 10mA
• Max Force Pressure: 348 PSI
• Output Voltage: 0.5-4.5VDC
• Supply Voltage: 5VDC
• Weight: 0.9 lbs
• Working Pressure Range: 0-200 PSI